"M16X1,5 KBRM-16 F"

Shallow Strut, Elongated Holes On Back, 13/16" Height, 1-5/8" Width, Pre-Galvanized Steel, 14 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

4-11/16" Square Box, Welded, Metallic. Depth: 2-1/8". Side Knockouts: (12) 1/2" & 3/4" TKO (eccentric) . Bottom Knockouts: (1) 1/2" & (1) 3/4" & (2) 1/2" & 3/4" TKO (eccentric). Cubic Inches: 42.0". Includes: Ground Screw.

Category: 4-11/16" Square Metallic Boxes

Strut with Slots, 1-5/8" Depth x 13/16" Width x 10' Length, 12 Gauge Steel, Pre-Galvanized

Category: Steel Strut with Slots

GFCI Receptacle, SmartLock Pro Slim Series, Tamper Resistant, Commercial/Residential Grade, NEMA 5-15R,15 Amp, 125 Volt, 20 Amp Feed-Through, Back and Side Wired, White, Includes Nylon Wallplate/Faceplate, Screws And Self-Grounding Clip

Category: Tamper Resistant GFCI Receptacles

One-hole, flex lug, #4 AWG wire, 5/16 stud hole, 45° angle tongue.

Category: 1-Hole Copper Compression Lugs

GFCI Receptacle, SmartLock Pro Slim Series, Tamper/Weather Resistant, Residential Grade, NEMA 5-15R,15 Amp, 125 Volt, 20 Amp Feed-Through, Back and Side Wired, White

Category: Tamper / Weather Resistant GFCI Receptacles

Wiring Module, Fusible, 5 Terminals per 16 Channel, 24 Volt DC, Blown Fuse Indicator

Category: PLC Connection Cables

Shallow Strut w/ 9/16" x 1-1/8" Elongated Holes - 2" Centers, 14 Gauge Steel, Pre-Galvanized, 1-5/8 Inch Wide, 13/16 Inch High, 10' Long,

Category: Steel Strut with Elongated Holes

OZ-Gedney Type C Center Stopped Straight Squeeze Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 25/32 - 15/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Length X 15/16 IN Width, 1/2 IN Thread Length, Third Party Certification: UL File Number E-11852, UL Listed (Flexible Metal Conduit), CSA 009795 (Armored Cable), Hazardous Location: NEC 501-4(b), Class I, Division II, NEC 350-5 (Grounding Means), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable And Flexible Metal Conduit

Category: Single Barrel MC / AC Connectors

5/16" Hex Nut Driver, Shank Length: 3", Overall Length: 6-3/4"

Category: 3" Hollow Shaft Nut Drivers

Wiring Module, Fusible, 5 Term. Per 8 Channel, Blown Fuse Indicator.

Category: PLC Analog IFM Blocks

Mini-Change A-Size Receptacle, 5 Poles, 1/2 IN To 14 NPT Threads, Female To 16 AWG Leads, I IN OAL

Category: Cordset Mating Receptacles

4" Diameter, Ceiling/Fixture Saddle Box, Non-Metallic, Depth: 2-5/8", Cubic Inches: 12-1/2"

Category: Non-Metallic Saddle Boxes

Flat Rigid Box Support, Steel, Pregalvanized, 3 Boxes, Box Depth: 1 1/2", 2 1/8", 2 1/2", 2 7/8", 3", 3 1/4", 3 1/2", Box Size: 4", 4 11/16", 5", Stud Spacing: 8"–16"

Category: Metallic Box Supports

Kindorf Self-Aligning Channel Nut W/ Spring Attached, 5/16 IN THK, 5/16-18 Thread, Steel

Category: Strut Channel Spring Nuts

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3-1/2 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 5-1/2 IN Maximum Diameter X 2-5/8 IN Length, 1-3/16 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

Spring Nut, Diameter: 5/16 Inch, Material: Electro-Galvanized Steel, For Use with "A" and "C" Series Channel.

Category: Strut Channel Spring Nuts

Shallow Strut - 9/16" x 1-1/8" Elongated Holes - 2" Centers, Steel, Pre-Galvanized, Size: 1-5/8" Wide, 13/16" High, 10' Long, 14 Gauge

Category: Steel Strut with Elongated Holes

Channel Nut W/ long spring, Thread Diameter: 5/16", Material: Steel, Finish: Electro-Galvanized. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

Square Washer, 5/16 in, Material: Steel, Finish: Gold Galvanized.

Category: Strut Channel Washers

LAPP 10381400 PLUG ACC 5 MODULE FRAME MC SERIES USE WITH HBE 16 SERIES HOUSING

Category: Industrial Rectangular Connector Male Inserts

Anti-Short Bushing, Diameter 5/16 Inch, Non-Metallic. For use with Cable Sizes 14-2, 14-3 & 12-2.

Category: Anti-Short Bushings

3-Piece Step Bit Set, Hex Shank: 1/4", Step Sizes (3 Bits): 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8.

Category: Step Bit Kits