Search results

Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Secures into knockout with a zinc die-cast. Concrete tight when taped. Supports .530 to .790 cable range with a .620 end stop diameter.

Category: Single Barrel Saddlegrip MC / AC Connectors

ID COVER FOR IQ BATTERY-10C-1P-NA WITH INTERCONNECT WIRING

Category: Energy Storage Accessories

Reciprocating Saw Blade, Sawzall, 14 TPI, Length: 6", Includes: (5) Blades.

Category: Bi-Metal Reciprocating Saw Blades

3/4 Inch Blue EMT Conduit, Steel, 10 Foot Length

Category: Straight Colored Steel EMT Conduit

LED Photocell, 6A, 105-305V, 1000W, 1800 VA, Stem & Swivel Mounting.

Category: LED Photo Controls

Terminal Block Screwdriver. Over all length 7-3/4", Handle 3-3/4", Shank: 4", Tip 1/8"

Category: Terminal Block Screwdrivers

Junction Box, NEMA 12, Hinged Cover, 8 x 8 x 4 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes

Two Gang Adjustable Electrical Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic Adjustable Switch / Outlet Boxes

4 Inch Square Box, Welded, 2-1/8 Inch Depth, Side Knockouts: (8) 1 Inch, Bottom Knockouts: (3) 1/2 Inch, (2) 3/4 Inch, 30.300 Cubic Inches, Steel

Category: 4" Square Metallic Boxes

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

MC Cable Connector, Liquidtight, Size: 1/2 Inch, Concrete-Tight Zinc, Outdoor Rated, Zinc Die-Cast, Heavy-Duty, Fits: #10, #12, or #14 PVC Jacketed MC Cable

Category: Single Barrel MC / AC Connectors

3" to 2-1/2" PVC Conduit Reducer, Gray, For Use With Schedule 40 and 80 PVC Conduit

Category: PVC Reducers

4-Wire Range Cord Kit. SRDT, Right Angle Plug, Ring Terminals, Strain-Relief Connector, NEMA 14-50P, Size/Number of Conductors: 6/2, 8/2. Rating: 50 Amp, 125/250V AC, 6 Ft. Length, Black

Category: Range Cord Kits

EMT Conduit Strap, 1-Hole, 1-1/2 Inch, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel 1-Hole Conduit Straps

Open Angle Connector, 4 Holes, 45 Degree, Bolt Hole Diameter 9/16 Inch, Steel With Electro Galvanized Finish.

Category: Open Angle Strut Channel Connectors

600 MCM, THHN/THWN-2, Stranded Copper, 600V, Blue, Cut to Length

Category: 600 MCM Stranded Copper THHN

30 AMP, 3-Pole, Heavy Duty Safety Switch, Non-Fusible, 600 VAC, 250 VDC, NEMA 3R. Enclosure Dims: H: 15.88", W: 8.13", D: 5.25".

Category: 3-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

Cutting Oil, Thread Cutting Lubricant, Application: Use on All Types of Metals: Brass, Copper, Aluminum, Includes: (1) 12 oz Aerosol Spray Can. **CANNOT SHIP AIR FREIGHT**

Category: Cutting Tool Lubricant

1-1/4" Diameter, Rainproof Conduit/Plate Type Hub, Group 1, Conduit Size: 1-1/4" (31.8 mm), Used With 70, 100, and 125 MLO and MCB CH and BR Loadcenters and CB Enclosures, General Duty, Heavy Duty and Double Throw Safety Switches through 100 AMP

Category: Load Center Hub Covers & Adapters

Arlington GF861 - FLEX/EMT Screw In Coupling, 1/2 inch, Material: Zinc Diecast

Category: Die Cast Flex To EMT Couplings

6 Inch Oversized Wafer Trim Ring Adapter, For WF Series LED Recessed Down Light, Steel, White Finish

Category: Recessed Lighting Trim Rings

NM Cable Connector, 2-Screw, Straight, 3/8 Inch, Die Cast Zinc, For Use With One or Two 14/2 or 12/2 NM-B Cables or One 14/2 Through 10/3 NM-B Cable, Also listed for 18/3 to 12/3 SJO Cord

Category: Zinc Die Cast NM Cable Connectors

Power Supply, Switched Mode, Performance, 40 Amp, 960 Watt Output, 24 to 28 Volt DC Output, 3-Phase, DIN Rail Mount, 380-480 Volt AC, Input

Category: 3-Phase DC Power Supplies

Klein-Kurve® Heavy-Duty Wire Stripper Crimper 8-20 AWG, Six Stripping Holes For 8-18 AWG Solid And 10-20 AWG Stranded Wire, Crimps Connectors, Lugs And Terminals For 10–20 AWG Stranded Wire

Category: Combination Wire Stripper / Cutter Tools