"wiremold"

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

2100 RacewaySteel, Base, 2100 Series. Size: 10' Length, 1-1/4" Width, 7/8" Height. Includes: 1/2" Trade Size KOs, Screw Piercings on 8" Centers, Mounting Screw KOs on 2" Centers. Package Quantity: 10.

Category: Small 2-Piece Metallic Raceway Bases

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BS) brass.

Category: Assembled Poke-Through Units

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Black. Outlets (12") O/C: Total Outlets: (3) 15A, 125V: Single Circuit, Decorator Outlets.

Category: Single Circuit Tamper Proof Plugmold

90 degree full capacity divided internal elbow that provides a 2" (51mm) cable bend radius for fiber optic/UTP/STP installations. One pair of DS4001 Couplings included. Black

Category: Large 2-Piece Metallic Raceway Elbows

Aluminum flush style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (9) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Precut to 7 5/8 (194mm) to fit standard gypsum fire walls with a two-hour fire rating (6 (152mm) wall thickness). Pre-Cut Conduit, 2 In. Dia.

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Partition Feed KitPartition Feed Kit, Metallic. For use with: Dual Partition Feed Covers, RFB Style Boxes.

Plugin plugmoldSteel, Plug-In Plugmold, Length: 3 ft. Color: Black. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets. Includes: (2) Mounting Clips.

Category: Single Circuit Steel Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Ivory. Outlets (6") O/C: Total Outlets: (11) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Anodized Aluminum

Category: Square / Rectangle Recessed Box Covers

Medium base lamp holder 660W, 250V. Black general purpose phenolic. Ivory

6" Diameter, Recessed Poke-Thru Device, Metallic, GrayPoke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Gray (Die Cast). Recessed: 3-1/4 Inch. Diameter: 6 Inch. Depth: 16-3/4 Inch. Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Gray

Category: Square / Rectangle Recessed Box Covers

8" Poke-Thru Device, Recessed, Evolution Series, Brass8" Poke-Thru Device, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist Open. Recessed: 3-1/4", No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

Aluminum surface style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

Blank Faceplate. Covers seam where two sections of DS4000C come together. Finish - Black

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

6" Poke-Thru Assembly, Prewired for A/V, Duplex ReceptPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Twist, Material/Finish: Die-Cast Aluminum/Gray, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts the Extron® Electronics AAP and MAAP Series Devices, For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BK) painted black.

Category: Assembled Poke-Through Units

Designed to provide a solid secure panel to protect the audio/video equipment loaded within the enclosure. Panel is designed to work with the ECB2S, ECB2S-CR, and ECB2SRLNK boxes and is powder coated white to match the enclosure. The panels are field paint-able to match the room decor. Includes a lock and key.

Category: Frame & Rack Panels

Flush with floor, cast aluminum cover assembly available in brushed aluminum (AL), black (BK), and gray (GY). Maximum load capacity 3,000 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Black

Category: Square / Rectangle Recessed Box Covers