"wiremold"

Aluminum, Cover, AL Series. Size: 5' Length. Aluminum.

Category: Small 2-Piece Metallic Raceway Covers

5-1/2" Round Cover, Metallic, Cover Type: 2-5/8" Opening (w/o Abandon Plug), Device Type: Communication or Power. Material: Brass. For use in Carpet, Wood, Laminate, or Tile Flooring.

Category: Round Recessed Box Covers

Non-Metallic, 2-Gang, Device Box, Size: 4-7/8" Length, 4-3/4" Width, 1-3/4" Depth, PVC, Ivory

Category: 2-Gang Raceway Device Boxes

Transition Fitting/ 5500 Series Raceway to 400, 800,2300, PN03, PN05 & PN10 Latching Series Raceways, Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panel Connector, G4000 Series, Gray

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

EVO FLR BX SURF CVR W SOLID LID

Category: Recessed Compartment Box Covers

Poke-Thru Device, Flush, Assembled Unit, Nonmetallic Cover, Color: Brushed Brass Flange with Aluminum-Colored Cover. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet, Wood or Tile Applications.

Category: Assembled Poke-Through Units

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard height 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

Diagonal 45 degree turns on same surface. White

Category: Metallic Raceway Elbows

Installs commercially available straight blade and locking single receptacles with face diameters of 1.56"-1.58" (39.2mm-39.3mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Wm Alds4047c Alds4000 Single

Category: Large 2-Piece Metallic Raceway Cover Plates

Closes off unused gangs. NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, Laminate and Wood Flooring.

Category: Poke-Through Cover Assemblies

FLOORPORT LARGE FLANGED BLANK TOP

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, 8 Inch Diameter, Prewired, (2) 20A Duplex Receptacles, (1) 1/2 Gang Blank Housing, (3) 1 Gang Pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider Included

Category: Assembled Poke-Through Units

Floor Box, Rectangular, (4) Compartment, Depth: 5 Inch, 1/2 & 3/4 Inch Knockouts, Housing: Die Cast Aluminum, Black Tile Lid.

Category: Recessed Compartment Boxes

Steel, 2" Radius Insert for Divided Flat Elbow, 4000 Series. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Twelve 20a Outlets With T-Slots, 6' [1.8m] Cord. Length 77" [2m]. Receptacle Center-to-Center 6" [152mm]. 20 Amp Unit With A 20 Amp Resettable Circuit Breaker

Category: Commercial Grade Power Strips

This box has a 5" (127mm) depth design with an extra 2" (51mm) of width for additional wiring capacity and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Installs of duplex devices in divided aluminum raceway. 6" (152mm) offset divider included. Can also be used with 106 communication frames.

Category: Plugmold Covers

Four-piece power service fitting. Duplex opening both sides. Receptacles not included. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings