"wiremold"

Ultrasonic Ceiling Sensor utilizing 32 KHz frequency ultrasonic technology to detect occupancy. Voltage: 24 VDC, Current: 40 ma. Automatic or manual-on operation when used with a BZ-150 Power Pack. Omni-directional transmission (360° coverage) 2200 Sq.ft., 90 linear feet. Features: Isolated relay. Mounts to ceiling tile or Wiremold V5738-WH box.

Category: Ultrasonic Occupancy Sensors

EXTER BX CVR ASSY 2 CIR 20A DUP BK

Category: Temporary Power Distribution Boxes

WMD XCSAL2GRU-BK OUTDR CS ACC

Category: Phone Charging Stations

4IN PREWIRED SURFACE DUP CR AA

Category: Assembled Poke-Through Units

WMD 8ATC2PCRBK 8IN PRWRD CTRL

Category: Assembled Poke-Through Units

USB PLUGMOLD 5FT IVORY

Category: Single Circuit Tamper Proof Plugmold

Non-Metallic, Tee Fitting, 2900 Series. Size: 3-7/8" Length, 1-1/8" Width. PVC, White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Non-Metallic, Base, NM2000 Series. Size: 8' Length, 1-3/4" Width. PVC, Ivory.

Category: Plugmold Bases

Non-Metallic, External Elbow, PN10 Series. Size: 1-5/8" Length. PVC, Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

Clarity 6 TracJack, T568A/B, 180 degree, Wiremold Gray

Category: Snap-In Cat 6 Jack Inserts

Wire Clip, 2600 Series, Size: 3/4" Width, Holds Conductors in Place, For Use w/ Steel Pancake ® Overflow Raceway.

Category: Metallic Overfloor Raceway Clips & Couplings

2-Gang, Floor Box Assembly, Color: Nickel. Includes (2) 15A/125V Tamper Resistant Duplex Receptacles and (4) Screw Plugs

Category: Assembled Recessed Gang Boxes

WMD ALDS4047F ALDS4000 SINGLE

Category: Large 2-Piece Metallic Raceway Cover Plates

For covering seam where two pieces of 5500BD3 Base come together Ivory

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Accepts standard 15A and 20A duplex receptacles. NOTE: For RFB4-SS Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

Non-Metallic, 1-Gang, Sure Snap Device Box, NM2000 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, Fog White.

Category: Plugmold Device Boxes

Two-gang. For standard 30A, 50A, and 60A receptacles. Four sides of cover have one set of combination twistouts for 3000 Series Raceway. Hole cut in cover: 3 3/4" x 2 7/8" (95mm x 73mm). Base has five 1/2" trade size KOs. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 2-Gang Raceway Device Boxes

TracJack Stylistics Frame, four-port, Wiremold Ivory

Category: Snap-In Wallplate Inserts

TracJack Recessed F-conn 75 Ohm Wiremold Ivory

Category: Snap-In RCA Jack Inserts

TracJack USOC six-position RJ25C, Wiremold Ivory

Category: Snap-In Phone / Voice Jack Inserts

OR-KSFP1-99 1G PLATE (1)JACK WIREMOLD IVORY

Category: Keystone Wallplates

ORT KSFP6-99 TECHCHOICE FACEPLATE SG 6 PORT W/ LABEL "WIREMOLD" IVY

Category: Keystone Wallplates

Clarity 5E TracJack, T568A/B, 180 degree, Wiremold Gray

Category: Snap-In Cat 5e Jack Inserts