Cable Tray & Accessories

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT46SCSS item measures 4.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Reducers

STR SECTION 15 INCH WIDTH

Category: Straight Cable Ladder Tray

Divider used to divide CleanTray 45-degree elbow into two sections in frequent washdown areas. This Divider 45-Degree Elbow Outside Cover CleanTray, CT66DEOC45SS item measures 6.00x6.00 inch with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

Ladder Rack Curved Section, Outside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

Corner Support Bracket Kit provides additional support for 90-degree ladder rack junction. This Corner Support Bracket Kit, LCSKG item colored Gray with a material of Steel.

Category: Cable Tray - Runway to Ceiling Kits

90-Deg Horizontal E-Bend Section (cULus Classified) is a cable runway for horizontal direction change. This 90-Degree Horizontal E-Bend Section (cULus), L90HB18BLK item fits 18.00in with a material of Steel colored Black.

Category: 90° Horizontal Cable Tray Bend

Cable Runway Termination provides termination when last section of ladder rack ends away from a wall. This Runway Termination Kit, LRTK18B item fits 18.00 with a material of Steel color Black.

Category: Cable Tray - Runway Support Kits

Cable Runway Overhead 12-in. Stack Kit allows ladder rack to stack 12in above each other. This Runway Overhead 12-in. Stack Kit, LST12B item color Black with a material of Steel.

Category: Cable Tray - Runway Support Kits

Cable Runway Butt-Splice Kit (cULus Classified) joins straight ladder rack sections together. This Butt-Splice Kit (cULus), LBSKW item colored White with a material of Steel.

Category: Cable Tray Splicer Kits

Cable Runway Wall Angle Support fastens ladder rack to a wall or other flat surface. This Wall Angle Support, LWASK24BLK item fits 24.00 with a material of Steel color Black.

Category: Cable Tray Mounting Hardware

CleanTray 90-Degree Elbow used for 90-degree turns in washdown applications. This 90-Degree Elbow CleanTray Inside Cover, CT33EIC90SS item measures 3.00x3.00in with a material of SS304 finish Brushed.

Category: Straight Wire Basket

Cable Runway Movable Cross Member supports cable at drop locations between welded cross members. This Movable Cross Member, LMCM12G item fits 12.00 with a material of Steel color Gray.

Category: Straight Wire Basket

CLM 012260008 16/3 4-20'SJEO R/A

Category: Cable Tray Drop Outs

CBF UFS150200PG

Category: Cable Tray Mounting Hardware

1/4" plastic bolts and wing Connector fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

CBF CFG50/100EZ

Category: Straight Wire Basket

8 inch bolted reinforced wall bracket For wiremesh tray installations onto walls or channel framing Hot Dipped Galvanized is ideal for exterior applications

Category: Cable Tray Universal Brackets

Cable Tray Cover, Ventilated, Flanged, Aluminum, 24" Wide, 12' Long

Category: Straight Cable Tray Covers

43 inch Universal splice bar Used to join 2 pieces of wire mesh tray together Can be cut with a bolt cutter Can be bent by hand for use in tees elbows etc Hot dipped galvanized exterior installations

Category: Cable Tray Splicer Plates

6" Center Hanger - Only one threaded rod is needed to suspend tray. Suspension tube protets cables. Balanced loading is recommended Black Painted for indoor use

Category: Cable Tray Center Hangers

CBF ASIN316L

Category: Cable Tray Trapeze Hangers

Heavy Duty Cover Clamp for 5" NEMA, 6" Height, 24 Tray Width, Aluminum, with Stainless Steel Hardware

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Cable Tray, Ladder Type, Aluminum, 4" H x 24" W x 12' Long , Nema 20B

Category: Straight Cable Ladder Tray

CDY CCT4X96 96 SPAN 4 CONDUIT

Category: Cable Tray Trapeze Hangers