Search results

Device Mounting Plate, Type: (1) 1-3/8 Inch Receptacle Opening, For 6 Inch Poke-Thru Units Only

Category: Square / Rectangle Recessed Box Covers

WMD RFBA2C25 RFBA 2G 2.5 IN C

Category: Recessed Compartment Boxes

WMD RC4ATCNK

Category: Assembled Poke-Through Units

WMD 6CT-CTR

Category: Poke-Through Cover Assemblies

WMD CRFB-GFI-1

Category: Recessed Compartment Box Device Plates

POP UP 2 O/L 1 USB A 1 USB C

Category: Assembled Recessed Countertop Boxes

CRFB 6 PORT KEYSTONE COMM PLATE

Category: Recessed Floor Box Service Fittings

WMD 8CT-CTR 8IN POKE-THRU TER

Category: Assembled Poke-Through Units

WMD 8ATC2SN 8IN UNWIRED SURF

Category: Assembled Poke-Through Units

Retractor Cassette for HDMI

Category: Recessed Home Entertainment Box Covers

WMD 8ATC2AA

Category: Assembled Poke-Through Units

This blank plate accepts three (3) Ortronics TracJack inserts. Finish - Galvanized Steel

Category: Recessed Floor Box Service Fittings

4IN EVO SINGLE 1-9/16IN REC DEVICE

Category: Recessed Floor Box Service Fittings

WMD RFBAS1 RFBA 1.39 IN SINGL

Category: Recessed Compartment Box Device Plates

Cast Iron Floor box, Knoutouts: (2) 1/2 in, (2) 3/4 in, Adjustment: 2 in (PrePour), 1/2 in (PostPour), Cubic Inch: 24.7 in

Category: Recessed Adjustable Floor Boxes

Duplex Bracket, Internal, Accomodates 15/20A Duplex Receptacles, For Use With RFB4 Series Floor Boxes

Category: Recessed Floor Box Service Fittings

2-Gang, Cover Plate Flange, Non-Metallic, Color: Brown. WxL: 8-7/8" x 5-3/4". For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Accepts standard 15A and 20A duplex receptacles. NOTE: For RFB4-SS Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

2-Gang, Floor Box Assembly, Color: Nickel. Includes (2) 15A/125V Tamper Resistant Duplex Receptacles and (4) Screw Plugs

Category: Assembled Recessed Gang Boxes

For 881PVC Floor Box. Kit complete with two (2) 20A duplex receptacles, (receptacles can be wired as standard or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Gray

Category: Round Recessed Box Covers

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Anodized Aluminum

Category: Assembled Poke-Through Units

Communication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. Opening dimension is 9/16" x 3/4" (14.3mm x 19.1mm). NOTE: For use with RFB4-CI-1 only.

Category: Recessed Floor Box Service Fittings

1" IPS Extension for Aftersets Finish - Zinc

Category: Recessed Floor Box Service Fittings