Boxes & Enclosures

Type FD Dead End Deep Style Device Box, Iron, 1 Gang, 1 Outlet, 1 Knockout

Category: PVC Coated FD Device Boxes

2-Gang, Gang Box, 1-5/8 Deep, Width: 4-1/2 Inch, Side Knockouts: (2) 1/2 Inch and (2) 3/4 Inch, End Knockouts: (1) 1/2 Inch and (1) 3/4 Inch, Bottom Knockouts: (3) 1/2 Inch and (2) 3/4 Inch, Cubic Inches: 45.0, Drawn, Steel

Category: Metallic Gang Boxes

4-11/16" Square, Exposed Work Cover, Type: (2) Duplex Receptacles, 1/2" Raised, Drawn, Metallic. Cubic Inches: 10".

Category: 4-11/16" Square Metallic Box Covers

PVC Junction Box, Screw Cover, 12 Inch x 12 Inch x 8 Inch, Color: Gray, Material: PVC

Category: PVC / Polyester Screw Cover Junction Boxes

Wall Joint, Vertical, Pendant Arm Series, Bulletin CS4, Includes: Access Plate, Setscrews, and Gasket, Size/Dims: Fits 45 x 60 mm, Material/finish: Cast Aluminum/Light Gray Powder Paint.

Category: Enclosure Mounting Bracket Kits

Hubbell Wiring Device Kellems, Floor and Wall Boxes, Door Only forRF400, Non-Metallic, Brown

Category: Assembled Recessed Round Boxes

Fan/Fixture Support Box, 7-1/2 Inch Diameter, Bronze, Cubic Inches: 21, 70 LB Fixture Weight, Non-Metallic

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

4" Square, Fixture Cover, Mud Ring, 3/4" - 1-1/2" Raised, Adjustable, Drawn, Metallic

Category: 4" Square Metallic Box Fixture Covers

Switch/Outlet Box, 2-Gang, Old Work, Depth: 3-5/8 Inch, Cubic Inches: 34 Inch, Includes: Ears, Swing Clamps, Non-Metallic

Category: Non-Metallic Old Work Switch / Outlet Boxes

Weatherproof Cover, 2-Gang, (1) Duplex Receptacle, (1) Toggle Switch & (6) Single Receptacle, Vertical Mount, Die Cast, Diameter: 1.25", 1.375", 1.625", 1.6875 or 2.125". Padlockable Option. Bronze.

Category: 2-Gang Metallic Weatherproof Box Covers

SVDBH-15-20 PVC SLAB BOX KWIKON

Category: ENT Quick Connect Switch / Outlet Boxes

Weatherproof In-Use Cover With Inserts, 1 Gang, 2.390 Inch Deep, Vertical Mount, Aluminum Die Cast

Category: 1-Gang Weatherproof In-Use Box Covers

Conduit Outlet Box, Type GR, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRLB Hub Type, Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 4.88 Inch Opening, 72 Cubic Inches and (2) 1-1/2 Inch Threaded Hubs, For Use With Threaded Metal Conduit

Category: Explosion-Proof LB Conduit Outlet Boxes

Floor Box Cover, 1-Gang, Cover Type: Flip Cover. Device Type: All Devices. Color: Slate. Includes: Carpet Flange.

Category: Square / Rectangle Recessed Box Covers

Screw-Cover Gasketed Type 3 used as junction, pull or terminal box in windblown dust or rain applications. This Screw-Cover Gasketed Type 3, A10106GSC item measures 10.00x10.00x6.00 inches with a material of Steel finish Galvanized.

Category: NEMA 3R Screw Cover Enclosures

Panel for Small Enclosure, Type 1 and 3R. This Panel for Small Enclosure Type 1 and 3R, A8N8P item fits 8x8 inches with a material of Steel colored White.

Category: Enclosure Back Panels

Masonry Box, Type: Block-Loc™, 1-Gang, Welded, 3-1/2 Inch Depth, Gangable, Side Knockouts: 4 TKO, End Knockouts: 2 TKO, Bottom Knockouts: 2 TKO, Material: Steel/Galvanized. Integral Brackets Securely Hold Power and Data Outlets to Concrete Block from Front and Back in Masonry Walls, Even in Irregular Cut Openings.

Category: Gangable Masonry Boxes

HUBS3826 ADAPTOR

Category: Square / Rectangle Recessed Box Covers

Hyshed Hinge Cover Enclosure, Wall Mount, NEMA 4X, 15 Degree Slope Top, 20 x 20 x 8 Inch, Stainless Steel, Rated For Sanitary Washdown Cleaning Procedures.

Category: Stainless Steel Wall Mount Enclosures

Two-gang 2" trade size conduit housing assembly. Used on 8AT Series devices. Covers two (2) of the three (3) gangs in the center compartment. Only for use with 8AT Series units.

Category: Poke-Through Mounting Plates

3.5" Dia. Round Fixture Support Box For Use With Nonmetallic Sheathed Cable

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

4IN OCT EXTBX 1-1/8

Category: Octagon Metallic Box Extensions

Underground Enclosure With Cover and Hex Head Bolt, 19-1/16 x 23-9/16 x 12 Inch, HDPE Plastic

Category: Rectangular Concrete Underground Pull Boxes

CONCEPT™ C2 HMI Encl W/ Black Extrusions, 550 MM L x 600 MM W x 180 MM D, NEMA 4/IP66, Steel

Category: NEMA 4 Instrumentation Enclosures