Boxes & Enclosures

4 Square Box with threaded mounting holes, captive mounting nails each end. 3 Auto/Clamps each end,2 on side opposite to nails. Two #8Mounting Screws Factory Installed.

Category: Non-Metallic Adjustable Switch / Outlet Boxes

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.88" Opening, 18 Cubic Inches and (3) 3/4" Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

ORB GB-1-MC 2-1/2IN GANG SW BOX

Category: Metallic Switch / Outlet Boxes

Switch Box, 1 Gang, Gangable, 3 x 2 Inch, Plaster Ears, Old Work, Welded, Metallic, Depth: 2-1/2 Inch, Bottom Knockouts: (2) 1/2 Inch, Side Knockouts: (1) 1/2 Inch, End Knockouts: (1) 1/2 Inch, Cubic Inches: 12.5

Category: Metallic Switch / Outlet Boxes

1-Gang Weatherproof Blank Cover for FS Type Box

Category: Steel FS & FD Device Box Covers

Box Support Bracket, 4 x 4-11/16 IN Box, Stud Mount, Steel, Pre-Galvanized

Category: Metallic Box Supports

Adjustable Floor Box for Duplex Receptacle, 1-Gang, Depth: 3.300 Inch. Cubic Inches: 20". Adjustments: 0 - 1-3/4", Non-Metallic, Brass. Includes: Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade, Commercial Grade, Self Grounding, Side Wired, Steel Strap) and New & Old Work Brackets

Category: Assembled Recessed Adjustable Boxes

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Non-Hazardous Location Drain, 1/2 Inch, Raintight, Aluminum, Suitable for Class I Division II

Category: Enclosure Corrosion Inhibitors

Weatherproof Box, 2-Gang, Die Cast. Depth: 2". (7) 3/4" Threaded Outlets (3 in each end, 1 in back), Includes: (2) Closure Plugs & Ground Screw. Gray.

Category: 2-Gang Metallic Weatherproof Boxes

4" Square, Exposed Work Cover, Type: Combination, (1) Duplex Receptacle & (1) Toggle Switch, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7".

Category: 4" Square Metallic Box Covers

KO Seal, Gasketed, Oil Tight Hole Seals, 1 Inch, Steel

Category: Painted Steel Enclosure Hole Seals

TS Bracket, 4" Octagon Box with Non-Metallic Sheathed Cable Clamps, Drawn, Metallic. Depth: 1-1/2". Setback: 1/2". Side Knockouts: (3) 1/2". Bottom Knockouts: (5) 1/2". Cubic Inches: 15.5". Maximum Static Load: 50 lbs.

Category: Octagon Metallic Boxes With Brackets

4-11/16" Square Cover, 2-Device, Mud Ring, 1-1/2" Raised, Drawn, Metallic

Category: 4-11/16" Square Metallic Box Mud Rings

Junction Box, NEMA 4X, Hinged Cover, 10 x 8 x 4 Inch, Stainless Steel Type 304

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

RXP FLOOR-BOX-BOTTOM

Category: PVC / Polyester Screw Cover Junction Boxes

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRL Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover With 3.38 Inch Opening, 18.0 Cubic Inches and (2) 1/2 Inch Threaded Hubs. For Use with Threaded Metal Conduit.

Category: Explosion-Proof L Conduit Outlet Boxes

4" Round, Vertical/Horizontal Mount, Weatherproof Cover, Die Cast, Type: Round Cluster Cover with (1) 1/2" Outlet. Color: Bronze.

Category: Round Metallic Weatherproof Box Covers

Retrofit Ring, Square, 4 Inch, For Alarm Installation, Used to position a 4" Square Steel Junction Box in Sheet Rock Covered Wall Cavity, Works in 3/8" to 1-1/2" Thick Wall or Ceiling

Category: 4" Square Metallic Box Mud Rings

Poke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications. Note: UL Fire Classified For Up To 2-hour Rated Floors.

Category: Assembled Poke-Through Units

Weatherproof-In-Use Box, 1-Gang, Vertical Mount, Non-Metallic, 1-1/2 Inch, 22 Cubic Inches, White Cover, Includes: (1) Duplex, (1) Decorator/GFCI Receptacle Faceplate and (1) NM Cable Connector, For use in Retrofit Applications.

Category: Recessed Weatherproof In-Use Boxes

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Bracket, T Bar Hanger, Twist, No Plaster Ring

Category: Metallic Bar Hangers

1-Gang, Floor Box Cover, Metallic, Cover Type: Two Door/Dual Service. Device Type: Duplex Receptacle. Color: Brass.

Category: Square / Rectangle Recessed Box Covers