Boxes & Enclosures

A rigid steel pedestal with die-cast legs and mounting holes for bolting to the floor or casters. This Pedestal with Legs, AP26L44 item measures 26.00x4.00x4.00 inches with a material of Steel colored Gray.

Category: Industrial Consolet Pedestals

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Compartment Boxes

Use with AMD8C Series Covers to complete installation. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Cover Plate, Powder-Coated Aluminum, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

Unit includes one (1) 15A black tamper-resistant duplex receptacle. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

Filter Box Fans, 13.38x13.38x4.50, Lt Gray, Steel

Category: Enclosure Compact Cooling Fans

WMD PSRC9TCBS

Category: Assembled Poke-Through Units

Masonry Box, 5-Gang, Gangable, 3-1/2 Inch Deep, Side Knockouts: (4) 1/2 and 3/4 Inch Eccentric, End Knockouts: (10) 1/2 and 3/4 Inch Eccentric, Bottom Knockouts: (10) 1/2 and 3/4 Inch Eccentric, Cubic Inches: 111.7, Steel

Category: Gangable Masonry Boxes

In-Floor Delivery Systems, SystemOne, Round Flush Floorboxes, Accessory, Abandonment Plate, Gray

Category: Round Recessed Box Covers

RDT CKPM-BR 1G NM WIU MEDIUM

Category: 1-Gang Weatherproof In-Use Box Covers

STL 82C-1G-1-1/4 5-SQUARE SIN

Category: 5" Square Metallic Box Rings

Stainless steel or ABS grille washable aluminum or foam filter options to replace TFP Filter Fan. This TFP Grille for TFP6 Fan 6-inch, TG6SS item Brushed with a material of Stainless Steel 304.

Category: Cooling Fan Exhaust Grills

Enclosure, Type 4x, Clear Screw Cover, Size/Dims: 9.59 x 6.63 x 3.64 Inch, Polycarbonate

Category: PVC / Polyester Screw Cover Junction Boxes

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

KEL HBL1785 GRAY NEOPRENE

Category: 1-Gang Metallic Weatherproof Box Covers

Louver Plate Kits provide enclosure ventilation for excessive internal heat and moisture. This Louver Plate Kit, AVK43SS6 item measures 4.50x5.50 inches with a material of Stainless Steel 316 finish Brushed.

Category: Cooling Fan Exhaust Grills

Panels, fits 200x200mm, Steel

Category: Enclosure Back Panels

Shelf, Adjustable Depth, Bulletin Daccy (datacom Accessories And Hardware), Size/dims: Fits 19 In Rack A, Material/finish: Steel/ltgray

Category: Enclosure Shelves

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

4"oct Bx,stl,15.8cu,1/2-ko,brkt,clamp

Category: Octagon Metallic Boxes With Brackets

Rectangular Floor Box Cover, 1-Gang, Flush, Gray, Non-Metallic

Category: Square / Rectangle Recessed Box Covers

Single-gang device plate that will accept up three (3) Ortronics Series II dual modular inserts. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

4" Square, 2-Device, 1/2 Raised, Plaster Ring, Reinforced Phenolic, Color: Brown. Cubic Inches: 7". Classified for 2 Hour Firewall/Fire Ceiling.

Category: Non-Metallic Plaster Rings