Search results

SLOT HAL-FREE DUCT 3IN X1IN X6FT WH 6FT

Category: Standard Density Wire Duct

Right Angle Fitting, LDPH10/LD2P10 Raceway, Non-Metallic, Rigid PVC, Electric Ivory, One Inch Bend Radius for TIA/EIA Compliance

Category: 1-Piece Non-Metallic Raceway Elbows

Panduct® type NE halogen-free wiring duct, 1.5 W x 1.5 H, 6' length, halogen-free, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 2 W x 3 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® flush cover type D round hole wiring duct, 2 W x 2 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type MC metric narrow slot wiring duct, 75mm W x 62mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Panduct® type HN hinged cover narrow slot wiring duct, 2 W x 2 H, 6' length, PVC, light gray, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct® type FS solid wall wiring duct, 3 W x 1 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

End cap fitting for use with LD10 raceway, Electric Ivory, ABS, Length 2.00 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Tee fitting for use with LD3, LDPH3, and LDS3 raceway, Off White, ABS, Length 3.6 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

T-45 outside corner fitting for 90° angles, Off White.

Category: 2-Piece Non-Metallic Raceway Elbows

Halogen Free Slotted Wiring Duct, 1" x 1-1/2" x 6', White, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

T-45 wire retainers.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Panduct® type FS solid wall wiring duct, 6 W x 4 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Horizontal Tee for FiberRunner® 12x4 Routing System, Yellow

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Panduct® type FS solid wall wiring duct, 1 W x 1.5 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Inside corner fitting for use with LD5, LDPH5, and LDS5 raceway, Electric Ivory, ABS, Length 2.11 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside Corner Fitting, Series LD10, Non-Metallic, Electric Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

Raceway Divider Wall, PVC, Gray, 8 ft, Snaps Onto Rails In T-70/Twin-70 Raceway Base To Create Separate Channels, Must Use Wire Retainers To Ensure Channel Separation Per UL/CSA

Category: 2-Piece Non-Metallic Raceway

Panduct® type G wide slot wiring duct, 4 W x 1.5 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

T-45 snap-on hinged data bracket accepts up to four Mini-Com® Modules, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type F narrow slot wiring duct, .5 W x .5 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Transition Fitting, PVC, White, Used To Transition To Any LD Profile Or T-45 Raceway While Maintaining Channel Separation, Fitting Includes Bend Radius Insert

Category: 2-Piece Non-Metallic Raceway Covers