Search results

Panduct® type HN hinged cover narrow slot wiring duct, 1.5 W x 2 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Panduct Wide Slot Wiring Duct, Type G, 1.75" W x 2.12" H x 6' L, Lead Free PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type H hinged cover wide slot wiring duct, 2 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Right Angle Fitting,LD3/LDPH3/LDS3 Raceway, Non-Metallic, Rigid PVC, White, One Inch Bend Radius for TIA/EIA Compliance

Category: 1-Piece Non-Metallic Raceway Elbows

Panduct® snap-clip mounting bracket - type NE wiring duct, #6-32 x 1/4 (user supplied) screw required, 1.00" duct width, spring steel, metallic, 100 pc. package quantity.

Category: Wireway Support Hangers

T-45 inside corner fitting, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16"

Category: Mounting Hardware & Brackets

Flexible Slotted Wiring Duct, 1.97" W x 1.97" H x 19.7" Long, Polypropylene, Gray

Category: Special Purpose Wire Duct

Used to support the 12x4 system by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 2" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Category: Mounting Hardware & Brackets

Outside corner fitting. Used to join sections of T-70 raceway at outside corners. White.

Category: 1-Piece Non-Metallic Raceway Elbows

Workstation Outlet Center™ Offset Box for Pan-Way® Snap-On Faceplates. Two-piece box and bracket accept any standard electrical outlet. Accepts any Pan-Way® Snap-On Electrical/Communication Faceplates, Electric Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

Tee fitting for use with LD10 raceway, International Gray, ABS, Length 3.4 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Panduct® snap-clip mounting bracket - type NE wiring duct, #6-32 x 1/4 (user supplied) screw required, 2.00" duct width, spring steel, metallic, 100 pc. package quantity.

Category: Wireway Support Hangers

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame.

Category: Metallic Overfloor Raceway Device Plates

Wiring Duct Corner Duct Mounting Clip

Category: Wire Duct Clips / Retainers

Round Hole Wiring Duct, Base Only, 3.25" W x 3.12 H x 6' Long, PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Used to fully enclose 12x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

Used to support the 6x4 and 4x4 systems by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 1" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Category: Mounting Hardware & Brackets

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Category: Mounting Hardware & Brackets

Optional split hinged cover for the channel FR4X4YL2. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Category: Covers & Retainers

Panduct® type H hinged cover wide slot wiring duct, 1.5 W x 3 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® solid divider wall, 3.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

Panduct® type G wide slot wiring duct, 1.5 W x 1 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 4 W x 1.5 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct