Search results

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

Solid Divider Wall, Type NNC, Halogen Free, For 50mm High Duct

Category: Wall Duct Dividers

Type NC halogen-free wiring duct cover, 100mm W x 2M length, halogen-free, white.

Category: Wire Duct Covers

Type NC halogen-free wiring duct cover, 75mm W x 2M length, halogen-free, white.

Category: Wire Duct Covers

Panduct® type MC metric narrow slot wiring duct, 37mm W x 50mm H x 2M length, PVC, white.

Category: Standard Density Wire Duct

Type NC halogen-free wiring duct cover, 25mm W x 2M length, halogen-free, white.

Category: Wire Duct Covers

Type NC halogen-free wiring duct cover, 75mm W x 2M length, halogen-free, light gray.

Category: Wire Duct Covers

Low voltage drop ceiling/entrance end fitting for use with LD3 raceway, International Gray, ABS, Length 3.42 in.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a horizontal four way cross intersection. Cover included. Black.

Category: Wireway Cross Fittings

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C2BL6. Cover sold separately.

Category: Straight Channel Cable Tray

Snap-on 2-position sloped horizontal faceplate accepts any Panduit® NetKey® Module. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Twin-70 raceway base, 8 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

Category: 2-Piece Non-Metallic Raceway

The electro zinc-plated bracket in silver 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 18IN EZ EA

Category: Wire Duct Clips / Retainers

Panduct® type H hinged cover wide slot wiring duct, 3 W x 4 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

T-45 reducer fitting to LD10 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Elbows

Panduct® type HN hinged cover narrow slot wiring duct, 4 W x 4 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 4 W x 2 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type HN hinged cover narrow slot wiring duct, 3 W x 3 H, 6' length, PVC, white, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

T-70, TG-70, or Twin-70 raceway cover, 8 foot length.

Category: 2-Piece Non-Metallic Raceway Covers

Coupler fitting for use with LD3, LDPH3, and LDS3 raceway, International Gray, ABS, Length 1.00 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Attaches to 4x4 channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV454X4BL to change level of a straight horizontal run. Includes split cover.

Category: Elbows & Bends