Connectors, Crimps, & Termination

nVent ERICO Cadweld One Shot, Cable to Ground Rod, Plus, NX (ONE SHOT), 5/8" dia, #4, #3 Connection, Solid

Category: Cable to Ground Bar - Through and Tap

Power Distribution Block, 1 Pole, 310 Amp, 600 Volt AC, 1 Main/1 Branch, Thermoplastic Block

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

OKLIP - Mechanical Connector for Copper & Copperweld - Compact, 2-piece, high strength, high copper alloy OKLIP recommended for heavy duty connections - Neoprene rigns hold DURIUM bolts in place during installation - Installed with ordinary wrench.

Category: 2-Bolt Copper Tap Connectors

Mechanical Lug, Pressure Bar / Fixed Tongue, Copper Alloy, 1 Barrel, 1 Hole Mount, Rated for Copper Conductors Only, 14 AWG to 4 AWG, Bolt Hole: 1/4 Inch, Hex Head Screw

Category: 1-Conductor Copper Mechanical Lugs

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, 500 kcmil Cable, 3/8 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Ground Clamp, Water Pipe: 1/2 to 1 Inch, Wire Range: 10 to 2 AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Bronze

Category: Bare Wire Ground Clamps

Mechanical Lug, Pressure Bar / Fixed Tongue, Copper Alloy, 1 Barrel, 1 Hole Mount, Rated for Copper Conductors Only, 14 AWG to 1/0 AWG, Bolt Hole: 5/16 Inch, Hex Head Screw

Category: 1-Conductor Copper Mechanical Lugs

OZ-Gedney Type ABG Specification Grade Ground Connector, Conductor Size: 4 - 2/0 AWG, Length: 2 IN, Size: Ground Rod Size: 5/8 IN Or 3/4 IN, Ground Pipe Size: 3/8 IN, Copper Alloy, 1-1/2 IN Height, 2-3/8 IN Width, Third Party Certification: UL File Number E-24264, CSA 015978, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, NEMA : FB-1, For Cable Connection Parallel Or At Right Angles To Pipe Or Rod

Category: U-Bolt Ground Clamps

Twister® Wire Connector, Color Coded: Yellow, Type: Winged Twist, 18 to 10 AWG, 600 Volt Jar of 500

Category: Color Coded Twist On Wire Connectors

OKLIP - Mechanical Connector for Copper & Copperweld - Compact, 2-piece, high strength, high copper alloy OKLIP recommended for heavy duty connections - Neoprene rigns hold DURIUM bolts in place during installation - Installed with ordinary wrench.

Category: 2-Bolt Bronze Tap Connectors

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 5, Wire Range: 6 AWG - 600 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap Connector, Insulated, Clear, Single-Sided, Flex Rated, 3-Conductor

Category: Single Sided Entry Wire Connector Blocks

Permaground Copper Waterpipe Ground Clamp, Conductor Range 4/0-4, Pipe Size 4 to 5in, UL

Category: U-Bolt Ground Clamps

Distribution Block Cover, 3 Pole, for 1492-PDL Feeder Blocks

Category: Non-Insulated Connector Block Covers

CAD EGBA14408NN BAR GRD BUS 1

Category: Bus Bars

Irreversible mechanical connection connects the grounding conductor to the ground rod. It is fast and easy to install and only requires a hammer.

Category: Ground Rod Ground Clamps

Type Non Insulated Grounding Clamp, 10 To 2 AWG Conductor, Cast Bronze

Category: Bare Wire Ground Clamps

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 350 MCM, 5/8 Inch Bolt Hole, Coded Red, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Waterpipe Mallable Iron Ground Clamp for Wire Range 6 - 2, Water Pipe Size 1/2, 3/4, 1, or rebar 4 - 10

Category: U-Bolt Ground Clamps

Harmony, emergency stop, latching push pull, red, 40 mm, 1 NC and 1 NO

Category: Twin Insulated Ferrules

Compression Line Tap Connector for Aluminum to Copper and Aluminum to Aluminum Applications, 1.40" Height, 2.52" Length, .84" Width.

Category: H-Tap Press-On Lugs

Power Distribution Block, Linergy, 2-Pole, 1 Line, 4 Load, 175 Amp CU, 135 Amp AL, 600 Volt AC

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Compression C-Tap, Copper, 12 to 10 AWG, 3/8", Range-Taking Compression Tap Connector Made of Pure Copper. For Copper to Copper Applications. Designed to be Gripped in the Jaws or Dies of Installation Tool, then Slipped Directly Over Line for Easy Installation. Also Used for Deadending.

Category: C-Tap Press-On Lugs

Split Bolt, Aluminum, Run: 1/0 AWG to 350 MCM, Tap: 4 AWG to 350 MCM, Rated for Aluminum and Copper Conductors

Category: Aluminum Split Bolts