Connectors, Crimps, & Termination

Compression Lug, Belled End, Straight, 1-Hole Mount, Copper, Tin Plated, For Flexible and Code Copper Conductors, 350 kcmil Code, 250 Weld, 650/24 Locomotive, 1/2 In Bolt Hole, Coded White, Non-Stacking, Peep Hole, Packed 10 per Box

Category: 1-Hole Copper Compression Lugs

Power Distribution Block, High SCCR, Finger-Safe, Line: (2) 4 AWG to 350 kcmil, Load: (2) 4 AWG to 350 kcmil, 200kA SCCR

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

THB 54816BE CU TP 2HL LUG LON

Category: 2-Hole Long Barrel Copper Compression Lugs

Insulated AL service entrance compression sleeve for combinations of insulated CU, AL and ACSR conductors, Color Code: Red (Side A), Orange (Sdie B).

Category: Standard Barrel Aluminum Compression Sleeves

Copper butt splice, long barrel, 750 kcmil cable.

Category: Long Barrel Copper Compression Sleeves

Type AMT Multi-Port Connector, 600 VAC, Stranded Conductor, Ultraviolet Resistance, 14 To 1/0 AWG, Aluminum

Category: ln-Line Splicers/Reducers - Insulated

Plus cups are premeasured, self-contained cups of welding material that are placed in the mold and ignited by use of the Plus Impulse Exothermic Welding Control Unit, 25PLUSF20 colour code red.

Category: Plus Welding Material

For use with copper-bonded ground rods. These are heavy duty clamps that need a 9/16" Wrench.

Category: Ground Rod Ground Clamps

Compression Terminal, Two Hole, 350 kcmil, Aluminum, 3/8" Stud Size, 1" Hole Spacing, Internal Chamfer, Tin Plated

Category: 2-Hole Aluminum Compression Lugs

Copper Crimpit, .52 in L, #8 Sol. #8 Str. (Run) , #8 Sol. #8 Str. (Tap).

Category: C-Tap Press-On Lugs

Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) - 2/0 AWG ( Str.), 3/8" Pipe, 5/8" - 3/4" Rod, 3/8" Stud.

Category: Parallel Groove Clamps

Non-ins Fork Term, 12-10, #10, Metallic

Category: Non-Insulated Standard Fork Terminals

Homac CSB-250-2-S 1-Way 2-Outlet Encapsulated Multi-Tap Cable Block, Alum/Copper/Stranded Conductor, Alum

Category: Single Sided Entry Wire Connector Blocks

nVent ERICO Cadweld One Shot, Cable to Ground Rod, Plus, NX (ONE SHOT), 5/8" dia, #4, #3 Connection, Solid

Category: Cable to Ground Bar - Through and Tap

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 1/0 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

Multi-Tap Connector, Aluminum, Insulated, 4 Port, 1 Sided Entry, 4 AWG to 600 MCM, 600 Voltolt, AL/CU Rated.

Category: Single Sided Entry Wire Connector Blocks

Thin wall heat shrink, .38" (9.5mm) diameter, black cross-linked polyolefin, 200 ft. (61.0m) per reel.

Category: Thin Wall Heat Shrink

Butt Connector, 22 - 18 AWG, Pack of 1000

Category: Non-Insulated Butt Connectors

WEI 9004430000 TOOL H 25/185D ZH

Category: Single Insulated Ferrules

Power Distribution Block, 1 Pole, 310 Amp, 600 Volt AC, 1 Main/1 Branch, Thermoplastic Block

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

BUR KVSU40 UNIV OKLIP 400-800

Category: 2-Bolt Bronze Tap Connectors

Wire Connector, 18 - 10 AWG, Yellow, Bag of 500

Category: Color Coded Wire Connectors

AL Overhead Compression Tap Connector, Accommodates: AL, CU, ACSR, AAAC and Steel, Length: 1.25 IN.

Category: H-Tap Press-On Lugs

Deadbreak Equipment Connection Base Kit, 600A, 35 kV, 1 Kit/Box

Category: T-Body Deadbreak Connectors