Connectors, Crimps, & Termination

Low voltage electrical insulator. ISOTP35M10, Metric Thread, 1.378" (35 mm), 41 mm Hex Width, M10 Thread.

Category: Insulators

Low voltage electrical insulator. ISO1-14-14, Imperial Thread, 1.25" x 1.88" (31.75 mm x 47.7 mm), 1 5/8" Hex Width, 1/4 UNC Thread.

Category: Insulators

Insulation Piercing Connector, Main Conductor Range: 4/0 AWG - 2 AWG, Tap Conductor Range: 2/0 AWG - 6 AWG, Voltage: 600V, Copper Current Rating: 195 Amp, Aluminum Current Rating: 150 Amp, Bolt Head Size: 1/2".

Category: Splices - Insulation Piercing

Flat Tinned Copper Grounding Braid. MBJ50-300-16, 250 A Ampacity, 98.68 kcmil (50 mm²), 11.811" (300 mm), 0.65" (16.5 mm) Hole.

Category: Metallic Grounding Braids

Permaground Copper Waterpipe Ground Clamp, Conductor Range 4/0-4, Pipe Size 4 to 5in, UL

Category: U-Bolt Ground Clamps

Ground Rod, Galvanized, Diameter: 5/8 Inch, Length: 6 Foot

Category: Galvanized Ground Rods

Elastomeric Medium Voltage Cable Termination, Shielded/Non-Shielded Cable, 350 - 1000 MCM for 5kV and 250 - 750 MCM for 8kV, Insulation Diameter 0.85 - 1.45 Inch

Category: Medium Voltage Heat Shrink Splice Kits

Nimbus Insulated Aluminum Multi-Tap Connector, Conductor Range 750-250, 2 Ports, Dual Sided Entry, Tin Plated, UL, CSA

Category: Dual Sided Entry Wire Connector Blocks

Copper Compression Lug with Sight Hole, Conductor Size: 2/0 AWG, Conductor Diameter: .419", 1-Hole Stud, Long Barrel, Stud Diameter: 1/2". For use with Copper Conductors in Grounding, Bonding & Direct Burial Applications, Color Coded Black

Category: 1-Hole Long Barrel Copper Compression Lugs

Terminal Strip, Double Row, 12 to 22 AWG, 4 Circuit, 20 Amp, 150 Volt, Material: Thermoplastic

Category: Terminal Strips

FASTON 250 FLAG REC 12-10 AWG NPSTL

Category: Female Non-Insulated Wire Disconnects

Copper Mechanical Lug Offset, Conductor Range 2-8, 1 Port, 1 Hole, 1/4in Bolt Size, Offset, Direct Bury, UL, CSA

Category: 1-Conductor Copper Mechanical Lugs

Compression Splice Connector, Long Barrel, 600 MCM, 0.893 Inch Wire Diameter, Copper/Tin Plated, Rated For Grounding, Bonding, and Direct Burial.

Category: Long Barrel Copper Compression Sleeves

Size: 0.44 X 0.84in, Connection: Screw-on, Conductor Range: 22 - 14 Awg, Material: Thermoplastic, Color: Orange, Enclosure: Chemical-resistant, Flame-retardant, voltage Rating: 300, 600v, Temperature Rating: 105ce

Category: Color Coded Wire Connectors

Ring Terminal, 4 AWG, # 10 Stud Size

Category: Non-Insulated Ring Tongues

Compression Lug, 2-Hole, 2/0 AWG, 1/2 Inch Stud, Copper, BLU Lugs Are Suitable For Use At Voltages Up To 35Kv.

Category: 2-Hole Copper Compression Lugs

CRSM Cable Repair Sleeve, Diameter 1.30 - 2.00 Inch, Primary Insulation on 1/C Solid Dielectric Cable to 1kV

Category: Heat Shrink Repair Kits

1/2"-1" GRD CLAMP 3/4" HUB

Category: Ground Clamps With Hub

Power Splicer Block, 175A, 600V AC/DC, 3-Pole, (1) In/Out, (1) 14 - 2/0 AWG Line Side, (1) 1/4-20 Tapped Hole Load Side

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Metallics PT40 Grounding Pigtail, 12 AWG Insulated/Solid Wire, 7 in L, Copper

Category: Solid Wire Ground Pigtails

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Black, Shrink Ratio: 2:1, Size: 1 Inch, Expanded Insulation Diameter: 1 Inch, Recovered Insulation Diameter: 1/2 Inch, Tube Length: 48 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Water Pipe Ground Clamp, 1/2 to 1 Inch Pipe, 10 to 2 AWG, Bronze.

Category: Bare Wire Ground Clamps

Miniature Incandescent Lamp, 2 Watt, 6 Volt, Bulb: T3-1/4 (Tubular), Base: Mini Bayonet (Ba9s), Lumens: 8, Lamp Finish: Clear

Category: Tower Ground Clamps

KENNY CLAMP 3/0

Category: Armored Cable Ground Clamps