Connectors, Crimps, & Termination

Solid Pin Terminal for Copper and Aluminum Conductors 4/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Cable To Ground Rod, GT Mold Family, Nominal Diameter: 5/8", Actual Diameter: .555" - .635", Stranded Connection: 2/0, Quantity: 6 pc

Category: Cable to Ground Bar - Horizontal Tee

THB 60124 AL TP 1HL LUG LONGB

Category: 1-Hole Long Barrel Aluminum Compression Lugs

Terminal Strip, Wire Range: 22 - 10 AWG, 2 Circuits, 30 Amps, 600V, Center Spacing: .562", Terminal Screw Size: #8-32 Philsot.

Category: Terminal Strips

Ring Terminal, Vinyl Insulated, 18 - 14 AWG, 3/8" Bolt Hole, Blue, 1000/PK

Category: Vinyl Insulated Ring Tongues

Bonding Jumper, Size: 1 to 1-1/4 Inch, Length: 14 Inch, Tinned Copper Braid, For Use with Rigid/IMC Conduit

Category: Bonding Jumpers

Compression Lug, 2-Hole, 4 AWG, Copper, Long Barrel, 1/2 Inch Bolt Size, 1-3/4 Inch Hole Spacing, Tin Plated Blind End, Gray

Category: 2-Hole Long Barrel Copper Compression Lugs

Copper Compression Lug, 2 Hole W/ Inspection Window, 4/0 Flex, 1/2" Stud, 1-3/4"stud Hole Spacing, Long Barrel, Tin Plated

Category: 2-Hole Long Barrel Copper Compression Lugs

HYLUG™, Standard Barrel Copper Compression 1-Hole Lug with Inspection Window for Flex Conductor, 1 AWG, 3/8 Inch Stud, Tin Plated.

Category: 1-Hole Copper Compression Lugs

Male, Nylon-Insulated, Wire Range: 22 - 18, Mates with 0.25-in wide female tab, Color: Red, 100/PK

Category: Male Nylon Insulated Wire Disconnects

H-Type Compression Tap Connector, Main 4/0 - 2/0 AWG, Tap 4/0 - 3/0 AWG, Copper

Category: H-Tap Press-On Lugs

Female Disconnect, 22 - 18 AWG, .250" x .032" Tab, 1000/PK

Category: Female Non-Insulated Wire Disconnects

Female , Nylon-Insulated, Wire Range: 12 - 10, Stud Size: 1/4, Color: Red, 50/PK

Category: Female Nylon Insulated Wire Disconnects

Compression Lug, Copper, 2 Hole without Inspection Window, 250 kcmil, 3/8" Stud, 1" Stud Hole Spacing, Long Barrel, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Power Terminal Block, Splicer Terminal Block, 1-Pole, Line/Load: 6 AWG to 250 kcmil Copper Only, 600V AC/DC

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Heat Shrink Tubing, 1/2-48"-Green-100 P

Category: Thin Wall Heat Shrink

Cable to Ground Rod, One Shot, Type: GT, Ground Rod Diameter: 3/4", Conductor Size: 1 & 2 AWG (Solid), 2 & 3 (Stranded), Metric Conductor: 30-38 Square mm.

Category: Cable to Ground Bar - Horizontal Tee

2-Piece OKLIP Connector, Run: 2 - 2/0 AWG , Tap: 6 - 2/0 AWG, Copper Alloy, For Use in Heavy Duty Connections

Category: 2-Bolt Bronze Tap Connectors

Heat Shrink, Thin Wall, Diameter: 1/4 Inch, Length: 4 Foot, Shrink Ratio 2:1, Min/Max: 0.125 - 0.250 Inch, Material: Polyolefin Cross-Linked, Color: Red, Package of 25 Each.

Category: Thin Wall Heat Shrink

Burndy; Ground Connector; Gd; Bolt Size: 3/8 In; Conductor Range (main/primary):4 Awg Solid - 2/0 Awg Stranded; Material: High Copper Alloy; Raised Floor: No; Ground Rod Size: 2-1/2 - 2-7/8 In; Tube (ips) Size: 2-1/2 In; Installation Torque: 240 In-lb; Height: 5 In; Width: 4-1/4 In

Category: U-Bolt Ground Clamps

THB CPO1000-6-A HTSHK THIN WA

Category: Thin Wall Heat Shrink

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 6, Wire Range: 6 AWG - 600 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

CU Compression C Shape Compression Connector, 600 Volts to 35 Kv, Run: 3/0 Str. - 4/0 Str., Tap: 6 Sol. - 2 Str.

Category: C-Tap Press-On Lugs