Connectors, Crimps, & Termination

Compression Lug, Straight, 2-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 250 MCM, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Red, No Inspection Window

Category: 2-Hole Aluminum Compression Lugs

Compression Lug, 350 MCM, 2-Hole, 1/2 Inch Stud, No Inspection Window, Color Code Brown, Aluminum With Tin Plating, For Copper or Aluminum Conductors

Category: 2-Hole Aluminum Compression Lugs

Grounding Tail, Connection: Loop With Ground Screw And Stripped End, Wire Size: 12 AWG, Green, Wire Type: Solid, 10 IN Length, Package: 50/Bundle, C/US UL Listed, Ensures Compliance With NEC Standards, RoHS Compliant, For Device Grounding Applications

Category: Solid Wire Ground Pigtails

Wire Joints, (2) 14 to (3) 12 AWG, Metallic, Package of 200 EA.

Category: Copper Crimp Connectors

Compression Lug with Sight Hole, 4 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Gray, Die Code 29, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

Ring Tongues, Vinyl-Insulated, Wire Range: 12 - 10, Stud Size: 8, Color: Yellow, 25/PK

Category: Vinyl Insulated Ring Tongues

Connector Block, Single Primary/Multiple Secondary, 3-Pole, Line Side: (1) 14 AWG - 2/0 MCM, Load Side: (6) 14 AWG - 4 AWG, 600V, 175 Amps per Pole, Surface Mount

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Compression Lug, Straight, Long Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 2 AWG, 3/8 Inch Bolt Hole, 1 Inch Hole Spacing, Coded Brown, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Long Barrel Copper Compression Lugs

Compression Lug, Copper, 2 Hole without Inspection Window, 6 AWG, 3/8" Stud, 3/8" Stud Hole Spacing, Long Barrel, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Bare Ground Clamp, Bronze, Screw Material: Steel, Wire Range: 10 AWG (Solid) - 2 AWG (Stranded), Pipe Size: 1-1/4" - 2". *Dottie Part # 10025.* For Use in grounding Bare Copper Wire to Water Pipe, Rebar, Ground Rod or Copper Water Tubing.

Category: Bare Wire Ground Clamps

Compression Lug, 1-Hole, Copper, 4/0 AWG, 5/16" Stud Hole, Color Coded Purple, Standard Barrel with Inspection Window

Category: 1-Hole Copper Compression Lugs

In-Sure® Lever Wire Connector, 3-Port, Wire Range: 24 - 12 AWG, For Use With Cu/Cu Combinations Only, Jar of 350 When Ordering Multiples Of 350

Category: 3-Port Push-In Wire Connectors

Compression Lug, 1-Hole, Copper, Flex Conductor, 2 AWG, 5/16" Stud Size, Brown

Category: 1-Hole Copper Compression Lugs

Split Bolt Connector, Copper Alloy, Type S, Conductor Range: 10 Solid - 6 Solid, Conductor Diameter: .102 - .162". For use with Copper and Copperweld Conductors and Direct Burial Applications

Category: Copper Alloy Split Bolts

KUP-L-Tap Insulation Piercing Copper Connector, Dual Rated, Main Conductor Range 4/0-2, Tap Range 2/0-6, Tin Plated, UL, CSA

Category: Splices - Insulation Piercing

Copper Compression Lug with Sight Hole, Conductor Size: 8 AWG, 1-Hole Stud, Stud Diameter: 1/4". Color-Keyed: Red, Die Code: 21.

Category: 1-Hole Copper Compression Lugs

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 5/8" x 10' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Compression Lug, Long-Barrel, 500 MCM, 2-Hole, 1/2" Stud With 1.750 Inch Hole Spacing, Copper

Category: 2-Hole Long Barrel Copper Compression Lugs

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 1 AWG, 1/2 Inch Bolt Hole, Coded Green, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Split Bolt, Copper, Run: 8 to 2 AWG, Tap: 8 to 2 AWG, Rated for Aluminum and Copper Conductors

Category: Copper Alloy Split Bolts

Power Distribution Block, 3-Pole, 335A, 600V, (1) Line (6 AWG - 400 MCM) /(4) Load (14 - 2 AWG) per Pole

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Heat Shrink Repair Sleeve, 8 to 2/0 AWG, 48 Inch, 1 kV, Insulation Diameter Range: .43 to .82 Inch, Black, Suitable For Use Above Ground, Direct Burial, Submersible

Category: Heat Shrink Repair Kits

Harger, 1/4 x 4 x 12", Ground Bar With Wall Mounting Brackets and Insulators, "J" Hole Pattern, Copper Ground Bar, Each

Category: Bus Bars

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 2/0 AWG, 3/8 Inch Bolt Hole, 600 Volt to 35kV, Coded Olive, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs