Connectors, Crimps, & Termination

Compression Connector, Ground Rod to Grid, 2 AWG to 250 MCM, 3/4 Inch Ground Rod, Copper

Category: Grounding Grid Connectors

Power Distribution Block, Cover, 1-Pole, for Intermediate Series, Snap On

Category: Non-Insulated Connector Block Covers

Motor Stub Splice Insulator 3/0 AWG - 300 kcmil, Bolt Max Length: 1-1/2 Inch

Category: Low Voltage Motor Lead Splice Kits

Compression Lug, Straight, Long Barrel, 1-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 4/0 AWG, 3/8 Inch Bolt Hole, Coded Purple, With No Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Long Barrel Copper Compression Lugs

Compression Buttsplice, Copper, Tin Plated, 1 AWG, Standard Barrel, Temperature Rating: 90 Deg C, Voltage Rating: 600 Volts to 35 kV

Category: Standard Barrel Copper Compression Sleeves

Compression Lug, Straight, 2-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 3/0 AWG, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Ruby, No Inspection Window

Category: 2-Hole Aluminum Compression Lugs

Aluminum Universal Terminal, 2 Hole, 6 AWG (Str)-350 kcmil, 1/2" Stud, 1.75" Stud Hole Spacing, 2 Screws, Al/Cu Rated, Tin Plated.

Category: 1-Conductor Aluminum Mechanical Lugs

Butt Splice With Expanded Entry, Vinyl Insulated, 22 - 18 AWG, Copper Tin Plated, Red

Category: Vinyl Insulated Butt Connectors

Compression Lug, Short Barrel, 1 Hole 3/8 Inch Bolt Hole, Flex Conductor, Narrow Tongue, 2/0 AWG, Copper

Category: 1-Hole Copper Compression Lugs

Standard Fork Terminal, Nylon-Insulated with Insulation Grip, Wire Range: 18 - 14 AWG, 600V, Stud Size: 8, Color: Blue. **Order in Multiples of 100**

Category: Nylon Insulated Standard Fork Terminals

Compression Lug, Copper, 1-Hole, 5/16", Standard Barrel, 6 AWG, Inspection Window, Color Coded Blue

Category: 1-Hole Copper Compression Lugs

Wire End Ferrule, 4mm², 12AWG, Color Coded Gray, 14mm Stripping Length

Category: Single Insulated Ferrules

Compression Lug, Copper, 1 Hole with Inspection Window, 6 AWG, 1/2" Stud, Short Barrel, Tin Plated.

Category: 1-Hole Copper Compression Lugs

Compression Lug, 1-Hole, Copper, Flex Conductor, 2 AWG, 5/16" Stud Size, Brown

Category: 1-Hole Copper Compression Lugs

Ground Clamp, Water Pipe: 1/2 to 1 Inch, Wire Range: 8 to 2 AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Brass

Category: Bare Wire Ground Clamps

Primary device for easy assembly between a wide range of conductors to perform electrical power distribution. Single Pole Distribution Block UDJ-125A, Copper.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 1/0 AWG, 5/16 Inch Bolt Hole, Coded Pink, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Ground Connector / Water Pipe Clamp, U-Bolt Type, Suitable for Direct Burial, Copper Alloy, Pipe Size 1 1/4 - 2 Inch, 4 to 4/0 AWG Ground, Silicon Bronze Hardware

Category: U-Bolt Ground Clamps

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range: 2 AWG - 1/0 AWG, Insulation Diameter Range: 0.40" - 0.82", Relaxed Tube Length: 8.0". For use with all Solid Dielectirc (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

Locking Fork, Vinyl-Insulated, Wire Range: 12 - 10, Stud Size: 10, Color: Yellow, 25/PK

Category: Vinyl Insulated Locking Fork Terminals

Terminal Plug, Copper, 300 MCM, Offset, CU/AL Rated

Category: Aluminum Pigtail Adapters

Nimbus Insulated Aluminum Multi-Tap Connector, Conductor Range 4-14, 2 Ports, Single Sided Entry, Tin Plated, UL, CSA

Category: Single Sided Entry Wire Connector Blocks

Cable to Cable, Horizontal Tee, Type: TA, Cable Run Size: 4/0 AWG, Cable Tap Size: 4/0 AWG, Welding Material: 150.

Category: Horizontal Tees

Insulated Ferrule, Single Wire DIN End Sleeve, 12 AWG, Gray, 17/32" Wire Strip Length, 0.19" Max Wire Insulation, 500 Pack

Category: Single Insulated Ferrules