Connectors, Crimps, & Termination

Heat Shrink Tubing For Bus Bar, Circumference: 12.29 - 19.23 Inch, Color: Red, Rated 5 - 35kV, Material: Cross-Linked Polyolefin, For Insulating Rectangular, Square, or Round Bus Bar

Category: Bus Bar Heat Shrink Tubing

3MÖ Cold Shrink/Armorcast, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include armorcast structural material to reconstitute the cableÆs armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.205/0.187 x 0.020" (5.2/4.7 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78" (19.8 mm) long and 0.31" (7.9 mm) wide. The disconnect has a funnel entry configuration and a butted seam barrel. It comes in bottles of 50.

Category: Female Nylon Insulated Wire Disconnects

3MÖ Cold Shrink QT III 7620 S, 7680 S & 7690 S Series Termination Kit includes three 1 piece, 3 phase, skirted terminations. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The conjunction of high dielectric constant material and silicone rubber insulation allows the termination to withstand voltages of 5 to 35kV.

Category: Medium Voltage Outdoor Cold Shrink

Mechanical Lug - Offset, Floating Tongue / Pressure Bar, Copper Alloy, 1 Barrel, 1 Hole Mount, Bolt Hole: 3/8 Inch, Rated for Copper Conductors Only, 1/0 AWG to 350 MCM, Hex Head Set Screw

Category: 1-Conductor Copper Mechanical Lugs

Flexible Tinned Copper Braid, 15 x 1.62 x 0.25 Inch

Category: Metallic Grounding Braids

NSI 4-1000L4 NEMA PANELBOARD

Category: Aluminum Panelboard Lugs

45° Compression Lug, 2-Hole, Long Barrel, Copper, 6 AWG, 1/4" Stud

Category: 2-Hole Long Barrel Copper Compression Lugs

Compression Lug, Copper, 1-Hole, Flex, #4 AWG Wire, 5/16" Stud Hole, 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

THB RE10711 INS NYL RING TERM

Category: Nylon Insulated Ring Tongues

Color-Keyed 2-Hole Compression Lug, 4/0 AWG Copper Conductor, Die Code: 54, 5/16 IN Stud, Copper

Category: 2-Hole Long Barrel Copper Compression Lugs

PDB 3P CU MINIATURE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Busbar, 1/4 x 2 x 24 Inch, 36-Hole, Copper

Category: Bus Bars

Compression Terminal, 2 AWG Copper, Two Hole, 1/2 Stud Size, 1-3/4 Hole Spacing, Standard Barrel, Inspection Window, Internal Chamfer, Tin Plated

Category: 2-Hole Copper Compression Lugs

BUR YAV14L33BOX RING-

Category: 1-Hole Copper Compression Lugs

T&b 54918beub 500awg 1h 90deg lug

Category: 1-Hole Long Barrel Copper Compression Lugs

Multi-Tap Connector, 3-Port, Insulated, Clear, 10 AWG - 250 MCM, 2-Sided, For Aluminum or Copper Conductors

Category: Dual Sided Entry Wire Connector Blocks

In-Line Splicer Reducer, 600 MCM - 6 AWG, Polaris

Category: ln-Line Splicers/Reducers - Insulated

CAD PTC2L2L

Category: Parallel Horizontal Tees

PDB 3P AL INTERMEDIATE UL1953

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

CU Compression Terminal Code Conductor, Beveled Entry, 2 Hole/W/InspWindow, 14-10AWG(Code), 600V-35kV, 1/4" Stud, 5/8" Spacing, Lng bbl, Tin Plated.

Category: 2-Hole Long Barrel Copper Compression Lugs

Compression Terminal, 350 kcmil, Copper, Two Hole, 1/2 Stud Size, 1-1/4 Hole Spacing, Standard Barrel, Inspection Window, Internal Chamfer, Tin Plated

Category: 2-Hole Copper Compression Lugs

Compression Lug, 1-Hole, Copper, Short Barrel, Max 35kV, 6 Str. Wire, 1/4 Bolt Size, Tin Plated, Die Color Code Blue

Category: 1-Hole Copper Compression Lugs

Ring Terminal, 22 - 18 AWG Copper, No. 8 Bolt Hole, 1000 per Pack

Category: Non-Insulated Ring Tongues