Connectors, Crimps, & Termination

BUR GD1729 2/0SOL-250

Category: U-Bolt Ground Clamps

HARGER X04/04/0Q-4/0 CABLE CR

Category: Horizontal Splice - Lapped - Type X

2 Hole Offset Lug, Copper, NEMA, 4.5" X 1" X 0.125", 0.563" Hole

Category: 1-Hole Copper Compression Lugs

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: White, Shrink Ratio: 2:1, Size: 1/4", Expanded Insulation Diameter: 0.250", Recovered Insulation Diameter: 0.125", Tube Length: 100' Reel. Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

NSI IPLD250-4B 250 MCM - 6 AW

Category: Dual Sided Entry Wire Connector Blocks

Cable to Cable, Parallel Horizontal Connector, Type: PT, Cable Run Size: 2 AWG (Solid), Cable Tap Size: 2 AWG (Solid), Welding Material: 65.

Category: Parallel Horizontal Tees

Ring Terminal, Vinyl Insulated, Wire Range: 12 - 10 AWG, #8 - #10 Stud, 600 Volt, Color: Yellow, Material: Copper

Category: Vinyl Insulated Ring Tongues

Heat Shrink Tubing, 1/2-48"-White-100 Pcs.

Category: Thin Wall Heat Shrink

Compression Lug, Copper, 2-Hole, Long Barrel with Window, #2 AWG Wire, 3/8 Inch Stud Hole, 1 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

Vinyl-Insulated Ring Terminal, Length .94 Inches, Width .25 Inches, Maximum Insulation .170, Bolt Hole #4, Wire Range #18-#14 AWG, Color Blue, Copper, Tin Plated

Category: Vinyl Insulated Ring Tongues

Ring Terminal, Vinyl Insulated, 16 - 14 AWG, #4 Stud Size, Funnel Entry

Category: Vinyl Insulated Ring Tongues

Heat Shrink, Semi-Rigid, Adhesive Lined, Damp Locations, 3/4", Black, (5) 48" Pieces, .750" Min. Expanded I.D., .313" Max. Recovered I.D., .065" Nominal Recovered Wall Thickness

Category: Thin Wall Heat Shrink

Aluminum Multiple Tap Connector, Clear Insulated, 10 Port, 2 Sided Entry, 2 AWG-750 kcmil, Al/Cu Rated

Category: Dual Sided Entry Wire Connector Blocks

Thick wall adhesive lined, 1.5" (38.1mm) diameter, 48.0" (1219.2mm) length, adhesive lined red cross-linked polyolefin, 5 pc. package quantity.

Category: Heavy Wall Heat Shrink

One-hole, copper, single barrel, straight tongue lug, #8 SOL - 1/0 STR, 5/16 (7.9mm) stud hole.

Category: 1-Conductor Copper Mechanical Lugs

2 Hole Long Barrel Copper Compression Lug for Flexible Copper Cable 250 MCM - 1/2" Bolt Compression lugs for flexible copper cables are connects that have a gentle, continuous flared end to ensure ease of cable insertion of flexible and extra flexible cables such as locomotive, welding, mining cable and more. The flared end also reduces pressure on the cable strands after installation and protects them from chafing and breakage as a result of cable movement. Tin-plated for corrosion resistance. Rated 600 volts for copper cables only. Single mounting hole.

Category: 2-Hole Long Barrel Copper Compression Lugs

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 3/4" x 8' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Power Distribution Block, 2-Pole, Line: 14-2/0 Cu, 8-2/0 Al; Load: (6) 14-4 Cu, 8-4 Al, 600V AC/DC

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

3m(tm) Cold Shrink Indoor Termination Kit 5622k, 5 To 15 Kv, 0.44-0.65 In (1-17mm) Cable Insulation O.d.

Category: Medium Voltage Indoor Cold Shrink

Mechanical Grounding Connector, 3 Inch Pipe, 3-1/2 Inch Rod

Category: U-Bolt Ground Clamps

250 MCM - 1/0 AWG Parallel "T" Tap Connector With Cover Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Flexible cover allows for either parallel or "T" tap wire entry. Secure snap cover eliminates need for taping. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Tap Lugs

NSI IPLD3/0-4B 3/0-6 AWG POLA

Category: Dual Sided Entry Wire Connector Blocks

3M FP301-1-6 -Clear-10-10-Pc-

Category: Thin Wall Heat Shrink