Connectors, Crimps, & Termination

Color-Keyed 1-Stage Heavy Duty Battery Connector,) 2/0 AWG Conductor, Starter Termination, Copper Housing

Category: 1-Hole Copper Compression Lugs

Ferrule, 300 kcmil wire range, 1.50 (38.0mm) Pin Length.

Category: Non-Insulated Ferrules

Cu Comp Terminal Flex Cond, Bvl Entry, 2 Hole/W/InspWindow, 535.3 kcmil(1325/#24)DLO, 500 kcmil Flex, 600 V-35 kV, 3/8" Stud, 1.00" Spacing, Lng bbl.

Category: 2-Hole Long Barrel Copper Compression Lugs

Ring Terminal, 12 – 10 AWG, #6 Stud Size, Vinyl Expanded Insulation

Category: Vinyl Insulated Ring Tongues

Ring Terminal, High Temperature, 12-10 AWG, #10 Stud Size

Category: Non-Insulated Ring Tongues

THB 204210-3 RING TERM CU 12-

Category: Non-Insulated Ring Tongues

Compression Lug, Copper, 1-Hole, Flex, 3/0 AWG Wire, 1/2" Stud Hole, 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

BUR YA392NNT 750-LONG

Category: 2-Hole Long Barrel Aluminum Compression Lugs

BUR YAV2CLTC14FX90 #2 FLEX-1/

Category: 1-Hole Copper Compression Lugs

HYRDC 2/0F-2F STD CLR

Category: Compression Reducing Adapters

BELLED LUG-6FLEX-3/8STDS

Category: 2-Hole Long Barrel Copper Compression Lugs

4/0 STR GRD TERM-1/2STUD

Category: 1-Hole Copper Compression Lugs

Plus XF19 welding material is used for welds to cast or ductile iron. Plus cups are premeasured, self-contained cups of welding material, ignited with a Control Unit. Plus Welding Matr. Light Green

Category: Plus Welding Material

Thin wall heat shrink, .19" (4.8mm) diameter, orange cross-linked polyolefin, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

15 Ft. Replacement Lead For PLUSCU2L15 Welding Control Unit (Sold Separately)

Category: Welding Ignitor Control Units

NSI IPL3/0-4B 3/0-6 AWG POLAR

Category: Single Sided Entry Wire Connector Blocks

Compression Lug, Copper, 2-Hole, Flex, 2/0 AWG Wire, 1/2 Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Copper Compression Lugs

CDY TGBA12L06P

Category: Bus Bars

Copper Heavy Duty Splice, 500 kcmil, 3.19 Inch Length, 22 Index

Category: Short Barrel Copper Compression Sleeves

Compression Splice Reducer, Copper, 350 kcmil, Long Barrel Size Reduced Down To 4/0 AWG Wire Size, Internal Chamfer, Tin Plated

Category: Compression Reducing Adapters

CC-2 Mold, Weld Metal: 150, For Horizontal Cable Tap to Horizontal Cable Run, UL Listed, Conductor Size: RUN and TAP: # 4/0 AWG

Category: Horizontal Tees

STANDARD GROUND BAR 12IN W X 4IN H

Category: Bus Bars

Compression Terminal, 800 kcmil, Copper, Two Hole, 1/2 Stud Size, 1-3/4 Hole Spacing, Long Barrel Internal Chamfer, Tin Plated

Category: 2-Hole Long Barrel Copper Compression Lugs