Connectors, Crimps, & Termination

Aluminum Compression Pin Adapter, 2/0 AWG, 0.33" Plug Dia, 1.09" Plug Length, Al/Cu Rated, Tin Plated.

Category: Aluminum Pigtail Adapters

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 2/0 AWG, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Olive, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs

Compression Lug, Seamless, Copper, 1-Hole, 1 AWG Aircraft, AN1 Flex, 1/4 Inch Bolt Hole

Category: 1-Hole Copper Compression Lugs

Wire End Ferrule, 1.5mm², 16 AWG, Color Coded Red, 12mm Stripping Length, Order of 1 = Pack of 500 Ferrules

Category: Single Insulated Ferrules

Compression Lug, Copper, 1-Hole, 3/8", Short Barrel, 1/0 AWG Copper, Inspection Window, Tin-Plated, Color Coded Pink

Category: 1-Hole Copper Compression Lugs

Locking Fork Terminal, Nylon Insulated, 18 - 14 AWG, #6 Stud Size, Blue, 1000 Pack

Category: Nylon Insulated Locking Fork Terminals

Compression Butt Splice, Long Barrel, Wire: 6 AWG, Material/Finish: Copper/Tin Plated

Category: Long Barrel Copper Compression Sleeves

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: # 2 - 1/0 AWG, Motor Lead Range: # 4 - 1/0 AWG. Voltage Range: 0-1000V, Connection Type: 1-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Low Voltage Motor Lead Splice Kits

Flame-Retardant Compound, Size C, 21.5 OZ, 30.6 Cubic Inches

Category: Insulating & Sealing Compound

Female Disconnect, Nylon Fully Insulated, 16 - 14 AWG, Tab Size 0.250 Inch, Copper With Tin Finish

Category: Male Nylon Insulated Wire Disconnects

Copper Butt Splice, Tin-Plated Copper, Standard Barrel, #2 AWG Wire

Category: Standard Barrel Copper Compression Sleeves

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Black, Shrink Ratio: 2:1, Size: 3/8 Inch, Expanded Insulation Diameter: .375 Inch, Recovered Insulation Diameter: .187 Inch, Tube Length: 6 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Plus cups are premeasured, self-contained cups of welding material that are placed in the mold and ignited by use of the ERICO Plus Impulse Exothermic Welding Control Unit. F20, 250PLUSF20.

Category: Plus Welding Material

Compression Butt Splice, Long Barrel, Wire: 1 AWG, Material/Finish: Copper/Tin Plated

Category: Long Barrel Copper Compression Sleeves

1 Port Aluminum Lug 1/0-14 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

Category: 1-Conductor Aluminum Mechanical Lugs

Compression Lug, Straight, 2-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 2/0 AWG, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Olive, No Inspection Window

Category: 2-Hole Aluminum Compression Lugs

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 4 AWG, 3/8 Inch Bolt Hole, 600 Volt to 35kV, Coded Tan, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs

Compression Buttsplice, Copper, Tin Plated, 300 MCM, Long Barrel, 4.34 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 volts to 35 kV, Color Code White

Category: Long Barrel Copper Compression Sleeves

Copper Compression Lug with Sight Hole, Conductor Size: 6 AWG, Conductor Diameter: .184", 1-Hole Stud, Stud Diameter: 3/8". For use with Copper Conductors in Grounding, Bonding & Direct Burial Applications.

Category: 1-Hole Copper Compression Lugs

Nsi 4tc 4-14 Cu Lug

Category: 1-Conductor Copper Mechanical Lugs

Ground Connector / Water Pipe Clamp, U-Bolt Type, Suitable for Direct Burial, Copper Alloy, Pipe Size : 8 Inch, 4 to 4/0 AWG Ground, Silicon Bronze Hardware

Category: U-Bolt Ground Clamps

Copper Terminal, Offset Tongue, 1 Hole, 14 AWG (Sol)-6 AWG (Str), #10 Stud, 1 Screw.

Category: 1-Conductor Copper Mechanical Lugs

Fork Terminal, Vinyl Insulated, 22 to 18 AWG. #6 Stud, Red

Category: Vinyl Insulated Standard Fork Terminals

Motor Stub Splice Insulator 350 AWG - 500 kcmil, Bolt Max Length 1-3/4 inch

Category: Low Voltage Motor Lead Splice Kits