Connectors, Crimps, & Termination

C-Tap Connector, Wire Range: 6 AWG to 4 AWG, 5/8 Inch C-Tap Length, (Run) 6 AWG to 4 AWG (Tap), Copper

Category: C-Tap Press-On Lugs

IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 10 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated

Category: Vinyl Insulated Ring Tongues

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Aluminum, Tin Plated, For Copper or Aluminum Conductors, 250 MCM, 1/2 Inch Bolt Hole, 600 Volt to 35kV, Coded Red, No Inspection Window

Category: 1-Hole Aluminum Compression Lugs

Ring Terminal, Nylon Insulated, 12 - 10 AWG, 5/16 Inch Stud Size, 600 Volt, Yellow, Package of 50 Each

Category: Nylon Insulated Ring Tongues

Male Disconnect, Nylon Fully-Insulated, 22 - 18 AWG, .25" x .032" Tab, Red, Pack of 50

Category: Male Nylon Insulated Wire Disconnects

Copper Compression Lug with Sight Hole, Conductor Size: 1 AWG, Conductor Diameter: .332", 1-Hole Stud, Stud Diameter: 1/2". For use with Copper Conductors in Grounding, Bonding & Direct Burial Applications.

Category: 1-Hole Copper Compression Lugs

Wedge Grip Clamp, 2/0 to 4/0 AWG, Aluminum, Maximum Load is 1000 Pounds

Category: Ground Wedges

Ground Rod, Copper, Length: 8', Diameter: 3/4", Corrosion Resistant, Average Tensile Strength: 80,000 PSI, Straightness Tolerance: .01" per Linear Foot.

Category: Copper Ground Rods

RC Series Insulated Fork Terminal, 12-10 AWG, 1.09 IN L, Brazed Seam/Serrated Barrel, Copper, Yellow

Category: Vinyl Insulated Standard Fork Terminals

Female Disconnect, Nylon Insulated, Funnel Entry, 12 -10 AWG, 0.250 x 0.032 Inch Tab Size, Yellow

Category: Female Nylon Insulated Wire Disconnects

Standard Fork, Vinyl-Insulated, Wire Range: 16 - 14, Stud Size: 10, Color: Blue, 100/PK

Category: Vinyl Insulated Standard Fork Terminals

1-Hole Locktite Lug, 8 To 2 AWG Copper Conductor, 1/4 IN Stud, Copper

Category: 1-Conductor Copper Mechanical Lugs

Mechanical Lug, 1 Conductor, 6 AWG - 350 MCM, Aluminum With Tin Plating, Dual Rated For Use With Copper/Aluminum Conductors

Category: 1-Conductor Aluminum Mechanical Lugs

Compression Buttsplice, Copper, Tin Plated, 500 Kcmil, Long Barrel, 2.25 Inch Splice Length, Temperature Rating: 90 Deg C, Voltage Rating: 600 volts to 35 kV, Color Code Orange

Category: Long Barrel Copper Compression Sleeves

C-Tap Connector, Wire Range: 3/0 AWG to 250 MCM, 1/2 Inch or 5/8 Inch Rod, (Run) 3/0 AWG to 250 MCM (Tap), Copper

Category: Grounding Grid Connectors

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 1 AWG - 250 KCMIL, Length: 1-1/2 IN, Size: 1 IN, Malleable Iron, Screws: Steel, Finish: Hot Dip Galvanized, Screws: Zinc Electroplated, 2-3/16 IN Height, Dimension B: 2-1/8 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

Ground Rod Clamp, Rod to Conductor, Bronze, Silicon Bronze, 3/4" dia, #8 Solid-3/0 Stranded, 10 mm² Solid-70 mm² Stranded, 9/16" Wrench

Category: Ground Rod Ground Clamps

Multi-Tap Connector, Insulated, Clear, Single-Sided, Flex Rated, 2 Conductor

Category: Single Sided Entry Wire Connector Blocks

Aluminum Multiple Tap Connector, Clear, Insulated, 3 Port, 1 Sided Entry, 10 AWG-350 kcmil, Al/Cu Rated.

Category: Single Sided Entry Wire Connector Blocks

Copper Compression Sleeve, Short Barrel, Wire Size: 2 AWG. Wire Diameter: .292". Suitable for Grounding, Bonding and Direct Burial Applications.

Category: Short Barrel Copper Compression Sleeves

Connector Block, Single Primary/Multiple Secondary, 3-Pole, Line Side: (1) 14 AWG - 2 AWG, Load Side: (4) 14 AWG - 10 AWG, 600V, 115 Amps per Pole, Surface Mount

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Wire Connector, Set-Screw, Color: Black, Wire Range: 22 - 10 AWG, Material: Brass, Package of 100, For Copper-to-Copper Connections Only

Category: Set Screw Wire Connectors

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Red, Shrink Ratio: 2:1, Size: 1-1/2 Inch, Expanded Insulation Diameter: 1-1/2 Inch, Recovered Insulation Diameter: 3/4 Inch, Tube Length: 48 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Polypropylene insulated ferrules single wire red DIN end sleeve, 2 AWG (35.0mm²), .71(18.0mm) pin length.

Category: Single Insulated Ferrules