Search results

Conduit Body, Type: LB, Size: 1/2 Inch, Form 85, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies

OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 1-1/8 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Square Head Close-Up Plugs

OZ-Gedney BC-G Series Flat Top Design Cover, 1 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A

Category: Iron Conduit Body Covers

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-45/64 - 2-61/64 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 2-1/16 IN Length

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1 IN, Conductor Range: 0.625 - 0.75 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type 15-G Conduit Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 23/32 IN Width, Length: 2-7/32 IN, 1-1/8 IN Height, Trade Size: 3/4 IN, Third Party Certification: CSA 9795, Applicable Third Party S

Category: Malleable Iron 1-Hole Conduit Straps

Rigid Compression Connector, Insulated, Concrete Tight, Size: 1-1/4 Inch, Material/Finish: Malleable Iron/Zinc

Category: Steel Rigid Conduit Threadless Connectors

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1-1/2 IN, Connection: Tapered FNPT Hub, Dimension A: 4 IN, 3 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I, Di

Category: Iron Rigid Conduit Elbows

2 IN PIPE STRAP RGD & IMC

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-1/16 IN, 1/4 IN Mounting Hole Width, 1 Holes, 1/4 IN Width, Trade Size: 1/2 IN, Dimension A: 2-1/8 IN, Applicable Third Party Standards: Federal Specification FF-S-76

Category: Steel 1-Hole Conduit Straps

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 3/8 IN Height, 4-5/8 IN Width, Size: 3-1/2 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Steel Conduit Locknuts

Conduit Bushings, Insulated, Threaded, 1-1/2 Inch, Malleable Iron/Zinc Plated Body, Thermoplastic Insulator With Maximum Temperature Rating of 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney Type RB Reducing Bushing, Size: 2-1/2 X 1 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 1/2, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 1/2-14 Tapered FNPT, Dimensions: 1-1/2 IN Diameter X 1-3/8 IN Length, Box Wall Thickness: 7/32 IN, Third Party Certification: UL

Category: Malleable Iron Conduit Hubs With Grounding

OZG 325-R 1-1/4 TO 3/4 RDC BS

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 1 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Fiber Conduit Body Gaskets

Conduit Locknut, Trade Size 2-1/2 Inch, Diameter 3.54 Inch, Thickness 0.39 Inch, Material Aluminum, Installation 8 TPI Threaded, Approval UL 514B, CSA C22.2, Applicable Standard W-F-408E, NEMA FB-1, Application Used Where there is a Concern with Fasteners Becoming Loose, Used On IMC/Rigid Conduit

Category: Aluminum Conduit Locknuts

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.375 - 1.75 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated B

Category: Straight Malleable Iron Cord Grips

Reducing Bushing, Threaded, Malleable, 1-1/4'' to 1/2''

Category: Iron Alloy Reducing Bushings

Reducing Bushing, Size: 1 x 1/2 Inch, Material: Aluminum

Category: Aluminum Reducing Bushings

Conduit Bushings, Insulated, Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.4 - 1.6 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 1.93 IN Throat Inside Diameter, 5/8 IN Thread Length, Dimensio

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Spec 5 Type X Conduit Body, 3/4 IN Hub, Length: 6-1/8 IN, 3-1/8 IN Width, 1-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, Third Party Certification: UL File Number E-18095, CSA LR-

Category: Type X Iron Conduit Bodies

OZ-Gedney Type TX Expansion Fitting, Trade Size: 3 IN, 5.38 IN Outside Diameter, Flexibility: EMT Conduit, Third Party Certification: UL 14895, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For EMT Conduit

Category: Steel EMT Expansion Fittings