Search results

3-1/2 IN LB MOGUL COND BDY

Category: Type LB Iron Conduit Bodies

OZ-Gedney Type 4Q-G Liquidtight Sealing Ring Assembly, Trade Size: 4 IN, Steel Retaining Ring, Neoprene Gasket, Finish: Zinc Electroplated, For Providing A Positive Seal Between Shoulder Of Fitting And Enclosure

Category: Liquidtight Connectors - Accessories

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 2 Inch, Width: 3/4 Inch, Gr

Category: Threadless Ground Bushings

OZ-Gedney Type LL Conduit Body, 1-1/4 IN Hub, Length: 7-7/8 IN, 2-5/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 34 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LL Iron Conduit Bodies

Conduit Sealing Bushing, Type CSML, 2 Inch, 1 to 4 Wire Capacity, Malleable Iron

Category: Rigid & IMC Bushings

OZGBBL-300

Category: Rigid & IMC Bushings

OZG HB-300 3" HDG INSLG BSHG

Category: Rigid & IMC Bushings

Grounding Bushing, Insulated, Threadless, Size: 1-1/2 Inch, Cable Range: 8 - 2/0 AWG, Malleable Iron

Category: Threaded Ground Bushings

Conduit Bushings, Insulated, Size: 1 Inch, Material: Malleable Iron, Connection Type: Threadless, Maximum Temperature Rating: 150 Degree Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney Type RBLG Insulated Grounding Bushing, Size: 1 IN, Bronze Body, Stainless Steel Screws, Connection: Set-Screw, 150 DEG C, 1-5/8 IN Outside Diameter, 3/4 IN Width, 14 - 4 AWG Grounding Wire, 1-3/8 IN Turning Radius With Lug, Third Party

Category: Threaded Ground Bushings

Oz-g 110 4-in Mall Grnd Lknut

Category: Grounding Conduit Locknuts

Short Elbow, Hazardous Locations, 45°, Female/Female, Size: 1/2 Inch, Material/Finish: Malleable Iron/Zinc

Category: Explosion-Proof 90 Degree Female Elbows

OZ-Gedney Type AX Expansion Fitting, Trade Size: 5 IN, 8 IN Outside Diameter, Length: 9-1/2 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Third Party

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type TNS Threaded Conduit End Bell, Size: 5 IN, Malleable Or Ductile Iron, Finish: Hot Dip Galvanized, Dimensions: 8-3/8 IN Diameter X 3-9/16 IN Length, 2-7/8 IN Bell, For Rigid Conduit And IMC

Category: PVC Bell Ends

Conduit Sealing Bushing, Conduit Size 3-1/2 Inch, 4 Inch, Pipe Size 4 to 4.5 Inch (Steel Pipe), 3.6 to 3.96 Inch (Cast Iron Pipe), Outer Conduit Diameter 6.065 Inch, Core Drilled Hole 6 Inch, Material PVC Coated Steel Pressure Disc, Used On Pipe, Conduit and Tubing

Category: Rigid & IMC Bushings

1" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

OZ-Gedney Type SE Watertight Service Entrance And UF Cable Connector, Size: 3/4 IN, Conductor Range: 0.275 IN X 0.475 IN - 0.400 IN X 0.610 IN (Oval Grommet), Malleable Iron Body, PVC Grommet, Steel Compression Washer, Finish: Zinc Electroplated Bo

Category: Iron NM Cable Connectors

OZ-Gedney Type SR Grip-Tite Strain Relief 90 DEG Connector, Size: 3/4 IN, Conductor Range: 0.5 - 0.625 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: 90° Malleable Iron Cord Grips

Conduit Body, Type: LB, Size: 1 Inch, Spec 5, Material: Malleable Iron, Included with Covers and Gaskets, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

OZG REC-1005S RDC CP IRN 1 TO

Category: Steel Rigid Conduit Couplings

OZ-Gedney Type SBLG Insulated Grounding Bushing, Size: 2 IN, Malleable Iron Body, Stainless Steel Clamping Tension Body, Stainless Steel All Screws, Finish: Zinc Plated Body, Tin Plated Copper Grounding Saddle, Connection: Set-Screw Threadless,

Category: Threadless Ground Bushings

Oz-g 4q-9200-l 2-in 90d L/t conn

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Grounding Connector, 90°, Size: 1-1/4 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type AC 45 DEG Center Stopped Squeeze Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Screw Clamp, Conductor Range: 17/32 - 39/64 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-3/8 IN Length X 1-1/4 IN Width,

Category: 90 Degree Two Screw Squeeze Flex Connectors