Search results

Combination Box/Conduit Hangers from Drop Wire/Rod and Beam. Mounts 4" Sq. Boxes with MC, AC Cable Plain Center-Hole for Screw or Threaded Rod Mount. Standard Packaging Quantity: 25.

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

Strut EMT Clamp, 2 Inch, 1-1/4 x 3.77 x 4.56 Inch, Steel With Electro-Galvanized Finish

Category: Strut Channel EMT Conduit Clamps

Flange-mount conduit clips (snap-close). 3/8" MC/AC cable to 1/8" to 1/4" flanges. Load limit: 25 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

Combination Box/Conduit Hanger, Drop Wire/Rod Beam, 1/4 Inch Conduit Plain Center Hole for Screw or Threaded Rod Mount, Wire Size #12

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

Pipe Support Strap, Size: 3/4 inch, Material: PVC Coated Steel. Used in either Vertical or Horizontal Position.

Category: PVC Coated Conduit Support Straps

Coupling, Size: 3/4 inch, Material: PVC Coated Steel.

Category: PVC Coated Couplings

Steel City® TS-103 1-Hole Snap Strap, 1 in, For Use With EMT Conduit, Steel, Zinc Plated

Category: Steel 1-Hole Conduit Straps

Rigid Strut Strap, 2 Inch Diameter, Steel with Hot Dipped Galvanized Finish, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

Sheathed cable and MC/AC cable support for studs. NMC sizes 14-2 with ground thru 12-3 ground MC/AC cable sizes 14-2 thru 12-3 to studs. Standard Packaging Quantity: 100.

Category: NM-B NMC & MC/AC Cable Support For Studs

Liquidtight Connector, 2 Inch, 45°, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Square Washer, 7/16 Inch Bolt Hole, 304 Stainless Steel, For Use With 1-5/8 Inch x 1-5/8 Inch Strut

Category: Strut Channel Washers

Closed Angle Connector, 45°, 2 Holes, Bolt Hole Diameter: 9/16 Inch, Material: Steel, Finish: Electro Plated Zinc.

Category: Closed Angle Strut Channel Connectors

Combination Box/Conduit Hangers from Drop Wire/Rod and Beam. Mounts 4" Sq. Boxes with MC, AC Cable from #12 Wire thru 1/4" Flange. Standard Packaging Quantity: 25.

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

PVC Expansion Coupling, One Piece, 1 Inch, 5 Inch Maximum Expansion

Category: PVC Expansion Couplings

1/2 Inch Pipe Strap, Steel for Use with Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Liquidtight Connector, Straight, Diameter 1/2 Inch, Non-Metallic, For Use With Non-Metallic Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Heavy-Duty Electrical Box Hanger with Extension Bracket: 3-5/8". Ultimate Static Load: 50 lbs. Standard Packaging Quantity: 25.

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

EMT Compression Coupling, 3/4 Inch Diameter, Rain Tight, Steel With Zinc Chromate Finish

Category: Steel Raintight EMT Compression Couplings

HYGIENIC REDUCING BUSHING 3/4IN TO 1/2IN TRADE SIZE 316 WITH CONDUIT ENTRY GASKET

Category: Stainless Steel Reducing Bushings

Conduit to Beam Fastener, 1 Inch Conduit, 1/8 to 1/4 Inch Flange, Side-Mount, Guide-Rite, Will Rotate 360°, Install with Hammer and Pliers

Category: Flange-Mount Cable/Conduit Clips

Non-Metallic Push On Connector, 1/2 inch, Angle 0° to 90°, Material: Non-Metallic, For use with Non-Metallic Liquidtight conduit, type B only.

Category: Zero To 90 Degree Adjustable Non-Metallic Liquidtight Flex Connectors

EMT Compression Connector, 1-1/4 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

EMT Compression Connector, 1-1/2 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Rigid Threaded Insulating Bushing, 3/4 Inch Diameter, Impact Resistant Polypropylene, Gray

Category: Rigid & IMC Bushings