Search results

Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.067lbs, Conduit size: 1" EMT, 0.75" IMC, Rigid, Push-type conduit to beam fasteners, .13" Min mount size, .25" Max mount size

Category: Flange-Mount Cable/Conduit Clips

Zinc die-cast, 1/2" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Snaps into knockout with external spring steel clip. Concrete tight when taped. Supports .710 to .910 cable range with a .620 end stop diameter.

Category: Single Barrel Saddlegrip MC / AC Connectors

Erc Sbt18 Bracket Support Con

Category: Conduit to Stud Supports

1/2 in. Strain Relief Connector

Category: Straight Non-Metallic Cord Grips

Tee,grid Clip,top Mount For 1 Conduit

Category: Conduit Hangers From Wire/Rod & Beam

Corner Angle Fitting, 90°, 4 Holes, Bolt Hole Diameter: 9/16 in, Material: 304 Stainless Steel

Category: 90 Degree Strut Channel Corner Connectors

CDY RIGD0075EG CLAMPSTRUT3/4

Category: Strut Channel Universal Conduit Clamps

J-Hook with Hammer-On Flange Clip, Swivel, Steel, Spring Steel, Daimeter: 3/4 Inch, 1/8 - 1/4 Inch Flange, Material: Steel.

Category: J-Hook From Wire/Rod & Beam

Liquidtight Connector, 3/8 inch, 45°, Insulated Throat, Material: Zinc Electroplated Steel

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

THB 4162 1-1/4IN PIPE STRAP 1

Category: Steel 1-Hole Conduit Straps

Revolver Grounding Lug, 3/4 Inch, 14 - 4 AWG, Metallic, For Use With Liquidtight Fittings

Category: Straight Non-Metallic Liquidtight Flex Connectors

Grounding Lug, 1/2 Inch, 14 - 4 AWG, Steel, UL Listed for Use On T&B Liquidtight Fittings

Category: Straight Non-Metallic Liquidtight Flex Connectors

Conduit Bushings, Type: Threaded, Size: 3/4 Inch, Maximum Temperature Rating: 150° Celsius, Material: Thermoplastic

Category: Rigid & IMC Bushings

MAX-LOC« Strain Relief Cord-Sealing Grip, 1/2" NPT, Straight Male, Cable Diameter 9.53-11.10mm (.375-.437")

Category: Straight Low Profile Non-Metallic Cord Grips

Conduit Body, Type: TB, FM8, Size: 1 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type TB Conduit Bodies

1-3/4" Stainless Reducing Bushing

Category: Stainless Steel Reducing Bushings

Liquidtight Sealing Gasket, 4 Inch, Stainless Steel Retainer, Thermoplastic Rubber Seal

Category: Liquidtight Connectors - Accessories

Liquidtight Connector, Straight, 1/2 Inch Diameter, ISO Metric Thread, Thermoplastic, Black

Category: Straight Non-Metallic Liquidtight Flex Connectors

Squeeze Connector, Straight, Trade Size 3/8 Inch, Knockout Size 1/2 Inch, Cable Range 0.656 - 0.406 Inch, Malleable Iron, Zinc Plated

Category: 45 Degree Two Screw Squeeze Flex Connectors

Grounding Bushing, Insulated, Diameter: 2-1/2 Inch, Size: 14 (SOL) - 4 (STR) AWG, Material: Malleable Iron, Aluminum Lug For Copper Conductors Only.

Category: Threadless Ground Bushings

Standard Strut Strap, Diameter: 2-1/2", Material: Steel, Finish: Hot Dipped Galvanized.

Category: Strut Channel Rigid Conduit Clamps

Rigid Three-Piece Coupling, 4", Threaded, Malleable

Category: Iron Rigid Conduit Three Piece Couplings

Conduit Locknut, Industrial Grade, 1-1/4 Inch Diameter, Steel With Zinc Finish

Category: Steel Conduit Locknuts

Conduit Hub, 1 1/2 Inch, PVC Coated, For Use With PVC Coated Conduit, Dimension A (Inches): 1.69 Dimension B (Inches): 3.5 Dimension C (Inches): 1.03 Max Wall Thickness (Inches): .25 Nominal Weight (Pounds): 0.6

Category: PVC Coated Conduit Hubs