Fittings

TMC2 Connectors for MC Cable, NPT Size: 2", Cable Armor Diameter: 1.57" - 1.88", Cable Jacket Diameter: 1.65" - 2.00", Material: Aluminum. Watertight, Class I, Division 2, 4X and IP66.

Category: Single Barrel MC / AC Connectors

One Piece Pinch On or Toggle In, Material: Polyamide Spring Steel, Thread Size 3/8-16. Standard Package Quantity: 100.

Category: Strut Channel Nuts

ProLine Fastener Packages, M20, Steel

Category: Deck & Grating Supports

3" to 2" PVC Swedge Reducer.

Category: PVC Swedge Reducers

Threaded Conduit Nipple, 2-1/2 Inch x 3-1/2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

EMT Pulling Elbow, 3/4 Inch, Type: 90 Degree, Handy Ell, Threaded, Zinc Die Cast

Category: Zinc Die Cast EMT Pulling Elbows

EMT Connector, Set Screw, 1 Inch, Die Cast Zinc, Used on EMT Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-408E, NEMA

Category: Type TB Aluminum Conduit Bodies

UNILETS EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting, Size: 1 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Tapered FNPT, Turning Radius: 2.38 IN, Length: 1-3/4 IN, Width: 1-3/4 IN, Standard: UL 886

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-3/32 IN, Trade Size: 1/2 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2,

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Box Mounting Plate with Far Side Support Stud Assembly, 4-11/16" Data Box, SG 3/4" DP Mud Ring, 1 Gang, Steel

Category: Prefab Assemblies

EMT Compression Coupling, Size: 3 Inch, Zinc Die Cast, For Use With EMT Conduit

Category: Zinc Die Cast Concrete Tight EMT Compression Couplings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3-1/2 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 5-1/2 IN Maximum Diameter X 2-5/8 IN Length, 1-3/16 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

Liquidtight Connector, 2 Inch, Straight, With Grounding Lug, Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Threaded Conduit Nipple, 1 Inch x 18 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

ST5 1 1/2 PVC COATED HUB

Category: PVC Coated Conduit Hubs

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-7/16 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/4 IN Length X 2-1/2 IN Width, 5/8 I

Category: Straight Squeeze Flex Connectors

Sealing Fitting, Female, Explosion-Proof/Dust-Ignitionproof, Vertical, 40% Fill, 1 Inch, Aluminum, For Use With Rigid/IMC Conduit

Category: Explosion-Proof Female Vertical Sealing Fittings

Liquidtight Sealing Ring Assembly, Trade Size: 2-1/2 Inch, Steel Retaining Ring, Neoprene Gasket, Finish: Zinc Electroplated, For Providing a Positive Seal Between Shoulder of Fitting and Enclosure

Category: Liquidtight Connectors - Accessories

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Reducing Bushing, Steel, 1-1/4 x 1/2 Inch, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Straight Strut Joiner, For 1-5/8 X 1-5/8 Inch Channel, Steel/Zinc Plated Finish

Category: Strut Channel Joiners

Steel City® FP-403 Conduit Flange Plate, 1 in Trade, 3-5/8 in Dia, Malleable Iron, Zinc Plated

Category: Threaded Floor Flanges

BLI B1506S ONE PC PIPE CLAMP

Category: Strut Channel One Piece Pipe Clamps

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 2-3/8 IN Width, 1-3/4 IN Height, 1-7/16 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors