Fittings

Strut Pipe Clamp, 2-1/2 Inch, 1-1/4 x 4-7/16 x 3.09 Inch, Aluminum

Category: Conduit Strut Strap - Aluminum

Strain Relief Straight Liquidtight Cord Connector, 3/4 IN Trade, .31-.56 IN Openings, Steel, Zinc Plated

Category: Straight Steel Cord Grips

Armored Cable Strap, 1-Hole, 3/8", Steel, For Use With Armored Cable

Category: Steel 1-Hole Armored Cable Straps

Kindorf Self-Aligning Channel Nut W/ Spring Attached, 5/16 IN THK, 5/16-18 Thread, Steel

Category: Strut Channel Spring Nuts

CANTEX 6203005 3" SLIP COUPLE

Category: PVC Repair Couplings

OZ-Gedney Spec 5 Type C Conduit Body, 3 IN Hub, Length: 15-1/8 IN, 4-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 181 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-7/8 IN Length X 2-13/16 IN Width, Third Party Certification: UL File Number E-11853 (Flexible Metal Conduit), E-11856 (Sheathed Cable), E-11858 (Service Entrance Cable), CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

UNIVERSAL BEAM FASTENER, 5/16-IN. TO 1/2-IN. FLANGE, STAKED STUD

Category: Flange Clips

Replacement Gland, Cable Range: 1.000 Inch - 1.125 Inch, Material: Neoprene Grommet. For Use w/ 1 1/4 Inch Connector Hubs.

Category: Replacement Cable Glands

Sealing Washer 1/2 In Trade Size

Category: Cable Gland Entry Thread Seals

CDY 4010100EG CLEVIS1EGREPL P

Category: Strut Channel Clevises

Offset Nipple, 2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Offset Nipples

NM cable connector zinc die-cast. 2 screw clamp type. Handles combinations of NM cable from #14 to #10. Up to 3 NM cables at one time. 3/4 Knockout. Also handles one 8/2, two 4/2 service cable Snap tight

Category: Zinc Die Cast NM Cable Connectors

EMT Conduit Strap, 1-Hole, 1-1/4 Inch, Steel, For Use With EMT Conduit

Category: Steel 1-Hole Conduit Straps

Spring Nut, Size 1/2 Inch, Material: Steel/Hot-Dip Galvanized, For Use With 1-1/2 Inch or 1-5/8 Inch Wide x 1-3/8 Inch, 1-1/2 Inch, or 1-5/8 Inch Deep Channel

Category: Strut Channel Spring Nuts

5-Hole Angle Connector, Electrogalvanized Steel, 3 Inch Length, 1-1/2 Inch Width, 4-1/2 Inch Height

Category: 90 Degree Strut Channel Corner Connectors

EGS TC100DCGSST MULTI HUB AIO CONDU

Category: Type T Aluminum Conduit Bodies

Threaded Conduit Nipple, 3/4 Inch x Close, Stainless Steel

Category: Stainless Steel Conduit Nipples

DOT C250CG 2-1/2 THREADED CON

Category: Type C Aluminum Conduit Bodies

Square Washer, Size: 1/2 in, Material: Stainless Steel.

Category: Strut Channel Nuts

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2-1/2 IN, 3-5/8 IN Outside Diameter, Connection: MNPS, 1-1/4 IN Thread Length, Flange Thickness: 3/8 IN, Third Party Certification: UL File Number E-1185

Category: Iron Chase Nipples

Tee Splice Plate, 4 Holes, Bolt Hole Diamater: 9/16 in, Material: Steel, Finish: Hot-Dipped Galvanized

Category: Flat Plate Strut Channel Connectors

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 6 - 1/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 3-3/4 IN Width, 2-1/8 IN Height, 2-3/16 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 3-1/4 IN Width, 2-1/8 IN He

Category: Malleable Iron Liquidtight Flex Connectors