Fittings

KEL CG814SST STAINLESS STEELSTRAIN

Category: Stainless Steel Strain-Relief Grips With Mesh

3/4" Stainless Steel Clamp Backs.

Category: Stainless Steel Rigid Conduit Clamp Backs

Threaded Conduit Nipple, 1-1/4 Inch x 7 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Hub Size: 1/2 Inch NPT, Straight Male Cord Connector, Cord Range: 0.25 Inch - 0.31 Inch, Form Size: F1, Material: Aluminum, Color Code: Black.

Category: Straight Aluminum Cord Grips

3/4" PVC Male Terminal Adapter.

Category: PVC Male Terminal Adapters

Eaton B-Line series bracket, 4.62" H x 12" L x 1.62" W, Steel, Electro-plated

Category: Strut Channel Brackets

EMT Strut Strap, Diameter: 1 in, Material: Steel, Finish: Electro Galvanized, Pre-Assembled

Category: Strut Channel EMT Conduit Clamps

APP RX50 1/2" 2 PIECE NM-B C

Category: Steel NM Cable Connectors

CTX 6202000 2IN DEEP SCKT W/STOP

Category: PVC Long Line Couplings

PVC Cement, Clear, All Weather, Fast Set, 1 Pint, For Use On Piping Systems For Potable Water, DWV (Drain, Waste, Vent), Electrical Conduit, Irrigation, and Sewer / Drain Applications

Category: PVC Cement

OZ-Gedney Spec 5 Type LL Conduit Body, 1/2 IN Hub, Length: 4-5/8 IN, 1-3/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 4 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA L

Category: Type LL Iron Conduit Bodies

Conduit Body Cover, Type Wedge, Form 7, 3-1/2 Inch & 4 Inch, Aluminum

Category: Iron Conduit Body Covers

Threaded Conduit Nipple, 3/4 Inch x 7 Inch, Aluminum, For use with Rigid Threaded Conduit

Category: Aluminum IMC Conduit Nipples

Bushed Conduit Nipple W/ Throat, 1-1/4 IN, Use W/ IMC/Rigid Conduit, Malleable Iron

Category: Iron Chase Nipples

Purple PVC Primer, with Brush Top, Includes: 1-Quart

Category: PVC Cement

Insulated Compression Connector, Size: 1 IN, Connection: Male Threaded X Compression, Material: Malleable Iron And Steel, Length: 1.63 IN, Thread Length: 0.63 IN, Diameter: 1.88 IN, Standard: UL 514B, CSA C22.2 No. 18.3, CSA 065178, NEMA FB-1, For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box

Category: Steel Rigid Conduit Compression Connectors

Conduit Body With Cover/Gasket, LR, 1/2 Inch, Aluminum

Category: Type LR Iron Conduit Bodies

Eaton B-Line series datacomm and low voltage support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel

Category: J-Hook From Wire/Rod & Beam

Conduit Body With Cover/Gasket, Type LR, Size: 1-1/2 Inch, Material: Aluminum/Neoprene

Category: Type LR Aluminum Conduit Bodies

Floor Flange, Threaded, 3/4 Inch, Malleable Iron

Category: Threaded Floor Flanges

Conduit Body, Type: LB, Size: 1-1/2 Inch, Spec 5, Material: Malleable Iron, Included with Covers and Gaskets, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-3/16 - 2-3/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2 IN Length X 3-5/16 IN Width, 3/4 IN Threa

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-7/16 IN Width, Size: 3/4 IN, 14 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Stand

Category: Aluminum Conduit Locknuts

Sealing Locknut, 3/4 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts