Fittings

Steel City CHASE HA-203 Conduit Nipple W/ Throat, 1 IN, Zinc Alloy

Category: Zinc Die Cast Chase Nipples

OZ-Gedney BS-A Series Domed Top Design Cover, 2-1/2 - 3 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Aluminum Conduit Body Opening

Category: Aluminum Conduit Body Covers

Rigid Compression Connector, 3-1/2 Inch, Steel, Concrete Tight, Used on Threadless Rigid Conduit, UL 514-B

Category: Steel Rigid Conduit Threadless Connectors

Conduit Body Cover, 1 Inch Aluminum, for LB-D, LR-D, LL-D, LC and TC Series Conduit Bodies, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Body Covers

Superstrut 703-2 Universal Conduit and Cable Clamp, 2 IN Conduit, 800 lb Load, 2.195-2.375 IN OD, Steel

Category: Strut Channel Universal Conduit Clamps

Compression Coupling, Raintight, Conduit Size 2 Inches, Material Zinc Plated Steel, For use with EMT Conduit

Category: Steel Concrete Tight EMT Compression Couplings

nVent CADDY Quick Clip Rod Stiffener, 3/8" Rod

Category: Rod & Wire Hangers

Rigid Stainless Steel 316 Compression Male Connector 1/2" Trade SizeFor Rigid

Category: Rigid Compression Connectors - Stainless Steel

Crln E948jr 2" Dia 6"long sleeve No Internal Stop

Category: PVC Repair Couplings

Conduit to Beam Clamp, Rigid: 3/8", EMT: 3/8", Flange: 1/4 - 1/8 Inch, Steel/Zinc

Category: Flange-Mount Cable/Conduit Clips

Push In Conduit Clamp, 3/4" EMT, 0.866" Min, 1.181" Max, 0.752" Nom OD, 1/4" Hole, Threaded

Category: Conduit Clips

OCA T68-4X-G COND BODY T FORM

Category: PVC Coated Type T Conduit Bodies

Cable Gland, Size: 32, NPT: 1 Inch, Cable Range: .67 to .104 Inch, Nickel Plated Brass, For Use With Unarmored Cable

Category: Cable Glands - Nickel Plated Brass

Universal Conduit and Cable Clamp, 1/2 Inch Conduit, 400 lb Load, .706-.84 IN OD, Steel

Category: Strut Channel EMT Conduit Clamps

5-IN. - PIPE AND CONDUIT CLAMP, RIGID, 5-IN., ZINC PLATED

Category: Strut Channel Universal Conduit Clamps

PVC Coated Conduit Body, Type T, 1-1/2 Inch, Form 7, Iron/PVC Coated

Category: PVC Coated Type T Conduit Bodies

EMT Compression Connector, Concrete Tight, Trade Size: 3-1/2 Inch, Material: Die-Cast Zinc, Standard Package: 10

Category: Zinc Die Cast Concrete Tight EMT Compression Connectors

Conduit Body, Type: LL, Size: 2-1/2 Inch, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LL Aluminum Conduit Bodies

CLB PV1200B2011 1-1/4 STRT ST

Category: PVC Coated Conduit Support Straps

Rod & Wire Angle Bracket For Use With 1/4 Inch Threaded Rod, Limit load: 200 lbs. Standard Package Quantity: 100.

Category: Rod & Wire Hangers

Conduit Clip,1/2 1/4-20 Thread Impression

Category: Conduit Clips

IMC/Rigid Conduit Body, Access Opening Right Side, Configuration LR, Cover Type Epoxy Powder Coated Copper Free Aluminum, Hub Location 90 Deg, Number of Hubs 2, Hub Size 3/4 Inch, Size 5.13 Inch L x 2.25 Inch W, Installation Set Screw, Material Epoxy Powder Coated Pressure Cast Copper Free Aluminum Body, Neoprene Gasket, Stainless Steel Screw, Form Type Form 85, Approval UL 514A/514B/E2527, CSA C22.2, Used On EMT Conduit, Applicable Standard NEC/CEC, NEMA FB-1, Capacity 7 Cu Inch

Category: Type LR Aluminum Conduit Bodies

Support, Safety Spring For Bus/Service Drop Grips -80 LBs- Breakload is 80 LBs

Category: Support Grip Safety Springs

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Aluminum, Finsish: Aluminum. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts