Fittings

Two Hole Corner Angle - Electro-Galvanized Finish (EG) Bolt Hole Diameter 9/16"

Category: 90 Degree Strut Channel Corner Connectors

EMT Compression Coupling, Size: 4 Inch, Raintight, Material: Steel, For Use with EMT Conduit, UL 514 B

Category: Steel Raintight EMT Compression Couplings

3-1/2" PVC Bell End.

Category: PVC Bell Ends

Fixture Twist On Support Clip, 5/8 Inch, For 15/16" Tee with 4WN. Load Limit: 50 lbs. Standard Packaging Quantity: 100.

Category: Acoustical T-Grid Ceiling Twist On Fixture Supports

Reducing Bushing, Threaded, 1-1/2 x 1 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Straight Male Cord Connectors, Form Size: F2, Color Code: Blue, NPT Hub Size: 1/2 Inch, Cord Dia. Range: 0.38 Inch - 0.50 Inch, Material: Nylon, Color: Gray.

Category: Straight Non-Metallic Cord Grips

Liquidtight Sealing Gasket, 1-1/4 Inch, Steel Retainer, Santoprene Rubber Seal

Category: Liquidtight Connectors - Accessories

Threaded Conduit Nipple, 1 Inch x 8 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Combo Nut Washer, 3/8"-16, 0.689 x 1.5750 x 1.5750 Inch, Steel

Category: Strut Channel Combo Nut Washers

Conduit Hub, 2-1/2 Inch, Insulated, Raintight, Zinc Die Cast, Threaded For Use With Rigid/IMC Conduit

Category: Die Cast Zinc Conduit Hubs

Standard Strut Strap, Diameter: 1", Material: Steel, Finish: Stainless Steel. For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

UNISTRUT FITTING, 1-5/8"x 7/8", VY

Category: Strut Channel Safety End Caps

Locknut, Bonded With Neoprene Gasket, 3 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

Eaton B-Line series adjustable J-hanger, 0.75" H x 4" L x 2.5" W, Steel, Yellow zinc chromate, Wall

Category: Strut Channel J Conduit Hangers

OZ-Gedney Type RB Reducing Bushing, Size: 1-1/4 X 1 IN, Steel, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 13/16 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups A, B

Category: Steel Reducing Bushings

OZ-Gedney Clamp Back, Size: 3/4 IN, 1/4 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 2-1/2 IN Length X 1-1/8 IN Width, 3/8 IN Hole, Dimension E: 9/16 IN X 7/16 IN, Third Party Certification: CSA 009795, Applicable Third

Category: Clamp Backs - Iron

Conduit Support Strap, Size 3/4 Inch, Length 1.92 Inches, Width 0.75 Inches, Height 1.57 Inches, Material Polypropylene, Gray

Category: Snap Lock Pipe Hangers

Conduit Bushing, Insulating, 3/4 Inch, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

EMT Combination Coupling, Type: EMT Set Screw to Flexible Metal Conduit, Size: 1/2 to 1/2 inch, Material: Zinc Die Cast

Category: Zinc Die Cast Flex To EMT Couplings

Liquidtight Connector, Adjustable: 0 to 90°, 3/4 inch, UV Rated Plastic, Sealing Ring, Material: Non-Metallic, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA

Category: Zero To 90 Degree Adjustable Non-Metallic Liquidtight Flex Connectors

Fixed Strut Support, Height 4.800 Inch, Length 6 Inch, Steel/Polyethylene

Category: Pyramid Pipe & Equipment Supports

EMT Compression Coupling, 1 Inch Diameter, Raintight, Screw-On, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Couplings

Threaded Conduit Nipple, 1-1/4 Inch x 2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Liquidtight Connector, 1-1/2 Inch, Straight, Zinc Electroplated Steel

Category: Malleable Iron Liquidtight Flex Connectors