Control & Automation

Marker Cards, 1 - 50, Horizontal, Snap-In, Individual, for 1492-L, 3 mm x 5 mm, 100 per Card, 5 in a Package

Category: Terminal Block Horizontal Marking Cards

Motor Controller, SMC-Flex, Open Type, 34 - 135 Amp, Input Voltage of 200 - 480 Volt, 100 - 240 Volt AC Coil

Category: Advanced Control Softstarters

Contactor, Safety, 9 Amp, 120 Volt AC Coil, Gold Bifurcated Contacts, 3 Normally Open, 1 Normally Open, 4 Normally Closed

Category: IEC Contactors - 0-16 Amp

Servo Motor, Rotary, 460 Volt, 5000 RPM, Low Inertia, 100 mm Frame Size, No Brake, SpeedTEC DIN Connector

Category: 480 VAC Servo Motors

1492-P Push-in Terminal Blocks , 2.5 mm² (AWG 28 - AWG 12) , 20 A , Feed-Through , Single Level ,1 Point On Each Side Per Circuit

Category: 2.5mm Feed Through & Ground Terminal Blocks

Transformer, Dry Type, 50 KVA, 1-Phase, 240 x 480 - 120/240 Volt AC

Category: PLC Terminal Bases

Reversing Contactor, IEC Standard, 23 Amp, 3-pole, 24 Volt DC, Electronic Coil, 1 Normally Open, 1 Normally Closed, Auxiliary Contacts

Category: IEC Contactors - Forward/Reversing

Cable, Motor Power, W/Brake Wire, Kinetix, 14 AWG, Continuous Flex, 25 Meter

Category: VFD Control Panel Cables

Contactor, Definite Purpose, 50 Amp, 600 Volt AC, 120 Volt AC Coil, 3-Phase, 3-Pole, Normally Open Contacts

Category: 3-Pole Definite Purpose Contactors

Module, Communications, ControlLogix, EtherNet/IP Bridge, Parallel Redundancy Protocol, Supports 8 Axis of Motion

Category: PLC Communication Adapters

Contactor, Safety, 30 Amp, 24 Volt DC, Electronic Coil, Gold Bifurcated Contacts, 2 Normally Open, 2 Normally Closed

Category: IEC Contactors - DC Operating

Operator Interface, QuickPanel+, 15 Inch, Color, TFT, Multi-Touch, Capacitive Screen, 24 Volt DC, Dual Ethernet Ports, Blank Bezel

Category: Operator Interfaces

Operator Interface, MobileView, 10 Inch Display, Illuminated ESTOP, Enabling Switch, Touch/Function Keys

Category: Operator Interfaces

Square D,MANUAL STARTER 600VAC,18A,3 hp 200...230 V AC 3 phases-5 hp 380...575 V AC 3 phases,3,M-0,3-Phase,600 V AC, Brushed Stainless Steel - Water tight and Dust tight (Indoor/Outdoor),M, Manual Starter, NEMA 4/4X, Pressure Wire Clamp, Thermal - Melting Alloy, UL Listed - CSA Certified, without

Category: Enclosed Manual Starters / Switches

Contactor, Definite Purpose, 60A, 3 pole, 30 HP at 575 VAC, 3 phase, 208/240 VAC 60 Hz 220 VAC 50 Hz coil, open

Category: 3-Pole Definite Purpose Contactors

1492-P Push-in Terminal Blocks , 1.5 mm² ( AWG 26 - AWG 14) , 13 A , Sensor Block , Multi-Level ,4 Points - 2 White, 1 Red, 1 Blue

Category: Three Level Sensor Terminal Blocks

25 Amp, 3-Pole, Definite Purpose Contactor, 600V Rated, Screw/Pressure Plate Terminals, 120V AC Coil. Series: D1.

Category: 3-Pole Definite Purpose Contactors

Starter, Size 1, 27 Amp, 600 Volt AC, 120 Volt AC Coil, Non-Reversing, Open, 3-Pole, 6 - 18 Amp, Solid State Overloads, Selectable Class

Category: NEMA Size 1 Open Motor Starters

Terminal Block, 15 Amp, 10 - 57 Volt AC/DC, Fuse Block, Black, Red LED Indicator, Spring Clamp, 4 mm, 25 per Package

Category: Fuse Holder Terminal Block Blown Fuse Indicators

Terminal Block, 25 Amp, 600 Volt AC/DC, 2 Connections Point per Side, Red, 30 - 12 AWG, 2.5mm, 50 in a Package

Category: 5.2mm Feed Through & Ground Terminal Blocks

Full Load Amperes Range: 14.00 - 22.80. Heater Pack with Standard Trip - Class 20. For NEMA & IEC Freedom Series 32 & 75 Amp Overload Relays ***Package of 3***

Category: Heater Elements - Freedom Series Packs

30mm Push Button Kit, 9001KS11BH13, 2 Position, Selector Switch, OFF ON Legend Plate

Category: 30mm Knob Selector Switches

Breaker, Molded Case, PowerPacT, J Frame, 250 Amp, 3-Pole, 600 Volt AC, 25kAIC, Lugs, Thermal Magnetic, 80%, ABC

Category: VFD Enclosure Kits

Terminal Block, 20 Amp, 600 Volt, AC/DC, 2 Circuit, Blue, 30 - 12 AWG, 2.5 mm, 25 in a Package

Category: Double Deck Feed Through & Ground Terminal Blocks