Search results
131 Found
ABB
ABB PSTX142-690-70 Softstarter, 142A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Item #: 2010762
CAT #: PSTX142-690-70
UPC: 320500501457
Company wide:
ABB
Softstart, 45A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
Item #: 2026262
CAT #: PSTX45-600-70
UPC: 320500501334
Company wide:
ABB
Softstarter - 142A, 208 - 600VAC, 100 - 250VAC Control, 3 PH, 24VDC Coil
Item #: 2155230
CAT #: PSTX142-600-70
UPC: 320500501464
Company wide:
ABB
Softstarter, 720A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
Item #: 2036159
CAT #: PSTX720-600-70
UPC: 320500510381
Company wide:
ABB
Softstarter, 60A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Item #: 1944378
CAT #: PSTX60-690-70
UPC: 320500501372
Company wide:
ABB
PSE, Softstart, 169 FLA, 130 FLA.
Item #: 642282
CAT #: PSE170-600-70
UPC: 804325571678
Company wide:
ABB
Softstarter, 208-600VAC, 100-250VAC Control, 24VDC, 370A, Overload
Item #: 2101444
CAT #: PSTX370-600-70
UPC: 320500501532
Company wide:
ABB
Softstarter, 105A, 208 - 600VAC, 100 - 250VAc Control, 3PH (Lugs Built In, Good For Up To 2/0)
Item #: 2365550
CAT #: PSTX105-600-70
UPC: 320500501310
Company wide:
ABB
Softstarter, 170A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Item #: 965451
CAT #: PSTX170-690-70
UPC: 888614237452
Company wide:
ABB
Softstarter, 300A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Item #: 2753663
CAT #: PSTX300-690-70
UPC: 320500501488
Company wide:
ABB
Softstarter, 210A, 208 - 600VAC, 100 - 250VAC Control, 3PH
Item #: 2207087
CAT #: PSTX210-600-70
UPC: 320500501501
Company wide:
ABB
Softstarter, 570A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
Item #: 1867369
CAT #: PSTX570-600-70
UPC: 320500508999
Company wide:
ABB
PSTX, N4, Softstarter, Extreme Duty, Enclosed
Item #: 1963308
CAT #: X250-B4-48-XD
UPC: 438177522436
Company wide:
ABB
PSTX, N4, Softstarter, Extreme Duty, Enclosed
Item #: 2863158
CAT #: X100-B4-48-XD
UPC:
Company wide:
ABB
Softstarter, 85A, 208 - 600VAC, 100 - 250VAC Control, 3PH
Item #: 1984668
CAT #: PSTX85-600-70
UPC: 320500501303
Company wide:
ABB
Softstarter, Enclosed, Extreme Duty, 75HP, 104A, 480VAC, NEMA 4, PSTX Series
Item #: 1826040
CAT #: X75-B4-48-XD
UPC: 438177522382
Company wide:
ABB
PSE, Softstart, 130 FLA, 104 FLA.
Item #: 1757612
CAT #: PSE142-600-70
UPC: 320500400682
Company wide:
ABB
Softstarter, 105A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Item #: 2845893
CAT #: PSTX105-690-70
UPC:
Company wide:
ABB
PSTX, ANYBUS, ETHERNET-IP, 2 PORT
Item #: 965479
CAT #: AB-ETHERNET-IP-2
UPC: 888614302983
Company wide:
ABB
ABB PSTX142-690-70 Softstarter, 142A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Softstarter PSTX142-690-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2010762
CAT #: PSTX142-690-70
UPC: 320500501457
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstart, 45A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. Weight: 10Lbs. 6 Inch Width, 12 Inch Height, 8 Inch Depth
Item #: 2026262
CAT #: PSTX45-600-70
UPC: 320500501334
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter - 142A, 208 - 600VAC, 100 - 250VAC Control, 3 PH, 24VDC Coil
PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 142 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 14.8" W: 7.8" D: 9.3" Weight: 15Lbs. 8 Inch Width, 15 Inch Height, 11 Inch Depth ** Qty 2 OF ASSOCIATED LUG KIT REQUIRED **
Item #: 2155230
CAT #: PSTX142-600-70
UPC: 320500501464
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
PSR, Softstarter, 46.2 FLA
PSR Series Softstart (Compact style). 46.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.
Item #: 2528682
CAT #: PSR45-600-70
UPC: 320500338343
Category:
Basic Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 720A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 15" W: 17" D: 15" Weight: 103Lbs. 36 Inch Width, 60 Inch Height, 16 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **
Item #: 2036159
CAT #: PSTX720-600-70
UPC: 320500510381
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
PSR, Softstarter, 34 FLA
PSR Series Softstart (Compact style). 34.0 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA42 Series Overload Protection & DB80 Series Mounting Kit.
Item #: 2424300
CAT #: PSR37-600-70
UPC: 320500338329
Category:
Basic Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 60A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Softstarter PSTX60-690-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 1944378
CAT #: PSTX60-690-70
UPC: 320500501372
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
PSE, Softstart, 169 FLA, 130 FLA.
PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 169 FLA (Full Load Amps). Heavy Duty: 130 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass. ***Lugs Required, See Associated Items For Lugs***
Item #: 642282
CAT #: PSE170-600-70
UPC: 804325571678
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 208-600VAC, 100-250VAC Control, 24VDC, 370A, Overload
PSTX370-600-70, Softstarter, 208 - 600 Volt AC Main Voltage, 100 - 250 Volt AC, 50/60Hz, Control Voltage, 24 Volt DC Control, IEC Maximum of 370 Amp, Built Electronic Overload Protection, 10 Inch Width, 19 Inch Height, 11 Inch Depth
Item #: 2101444
CAT #: PSTX370-600-70
UPC: 320500501532
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 105A, 208 - 600VAC, 100 - 250VAc Control, 3PH (Lugs Built In, Good For Up To 2/0)
Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0
Item #: 2365550
CAT #: PSTX105-600-70
UPC: 320500501310
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 170A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 965451
CAT #: PSTX170-690-70
UPC: 888614237452
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 300A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Softstarter PSTX 300-690-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2753663
CAT #: PSTX300-690-70
UPC: 320500501488
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 210A, 208 - 600VAC, 100 - 250VAC Control, 3PH
PSTX210-600-70 Softstarter For Max 600V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 210 Amp, 10 Inch Width, 19 Inch Height, 11 Inch Depth
Item #: 2207087
CAT #: PSTX210-600-70
UPC: 320500501501
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 570A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil
PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 590 FLA (Full Load Amps). Heavy Duty: 480 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. Weight: 60 Lbs. 14 Inch Width, 19 Inch Height, 11 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **
Item #: 1867369
CAT #: PSTX570-600-70
UPC: 320500508999
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
PSTX, N4, Softstarter, Extreme Duty, Enclosed
Enclosed Softstarter, 250 Hp @ 480V, 302 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.
Item #: 1963308
CAT #: X250-B4-48-XD
UPC: 438177522436
Category:
Enclosed Softstarters
Sustainable
Company wide:
ABB
PSTX, N4, Softstarter, Extreme Duty, Enclosed
Enclosed Softstarter, 100 Hp @ 480V, 130 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 30”H x 30”W x 12”D.
Item #: 2863158
CAT #: X100-B4-48-XD
UPC:
Category:
Enclosed Softstarters
Sustainable
Company wide:
ABB
Softstarter, 85A, 208 - 600VAC, 100 - 250VAC Control, 3PH
PSTX85-690-70 Softstarter For Max 690V Main Voltage &100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 85 Amp, 6 Inch Width, 12 Inch Height, 8 Inch Depth (Includes Lugs)
Item #: 1984668
CAT #: PSTX85-600-70
UPC: 320500501303
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, Enclosed, Extreme Duty, 75HP, 104A, 480VAC, NEMA 4, PSTX Series
Enclosed Softstarter, 75 Hp @ 480V, 104 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 30öH x 30öW x 12öD.
Item #: 1826040
CAT #: X75-B4-48-XD
UPC: 438177522382
Category:
Enclosed Softstarters
Sustainable
Company wide:
ABB
PSE, Softstart, 130 FLA, 104 FLA.
PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 130 FLA (Full Load Amps). Heavy Duty: 104 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass. ***Lugs Required, See Associated Items For Lugs***
Item #: 1757612
CAT #: PSE142-600-70
UPC: 320500400682
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Softstarter, 105A, 208 - 690VAC, 100 - 250VAC Control, 3PH
Softstarter PSTX105-690-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2845893
CAT #: PSTX105-690-70
UPC:
Category:
Advanced Control Softstarters
Sustainable
Company wide:
ABB
Terminal Enlargement, AF400, AF460
Terminal Enlargements For Af400 And Af460 Across The Line Contactors
Item #: 1431444
CAT #: LW460
UPC: 320500227210
Category:
Softstarter Terminal Enlargements
Company wide:
ABB
Terminal Shroud, 3-Pole
Terminal Shroud, Long and Deep, 3-Pole
Item #: 1029546
CAT #: LT370-30D
UPC: 320500481537
Category:
Softstarter Terminal Shrouds
Company wide:
ABB
PSR, Softstarter, 24.2 FLA
PSR Series Softstart (Compact style). 24.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA25 Series Overload Protection & DB25 Series Mounting Kit.
Item #: 2477907
CAT #: PSR25-600-70
UPC: 320500338282
Category:
Basic Control Softstarters
Sustainable
Company wide:
ABB
PSTX, ANYBUS, ETHERNET-IP, 2 PORT
PSTX AnyBus Adapter, 2 Port, Ethernet-IP
Item #: 965479
CAT #: AB-ETHERNET-IP-2
UPC: 888614302983
Category:
Softstarter Communication Adapters
Company wide:
131 Items found