Raceway - Non-Metallic

Tee fitting for use with LDPH5 and LDS5 raceway, Electric Ivory, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

T-45 reducer fitting to LD10 raceway, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Right angle fitting. Used to join sections of T-70 raceway at right angles, International Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

Inside corner fitting. Used to join sections of Twin-70 raceway at inside corners. White.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Tee Fitting with Divided Insert to Maintain Separation of Power and Data Cabling. For Use with LD2P10 Raceway, Off White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Panduct® type FS solid wall wiring duct, 2 W x 1 H, 6' length, PVC, light gray.

Category: 2-Piece Non-Metallic Raceway

Transition fitting. Used to transition to T-70 raceway, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Tee fitting insert. Mounts inside cove raceway tee fitting to maintain channel separation at tee junctions. Maintains a minimum 1" bend radius of cabling.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Entrance end fitting for LD2P10 raceway. Breakouts for 1/2" and 3/4" diameter conduit. White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", 1 1/4" and 1 1/2" for entry from ceiling or wall.

Category: 2-Piece Non-Metallic Raceway End Fittings

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FOV452X2YL or FOV454X4YL to change level of straight horizontal runs. Cover included.

Category: 1-Piece Non-Metallic Raceway Elbows

Panduct® type FS solid wall wiring duct, 2 W x 1.5 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® type FS solid wall wiring duct, 1 W x 4 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

T-45 electrical bracket and box for installation of 106 duplex outlet, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2OR or FIVRA4X4OR to change level of straight horizontal runs. Cover included.

Category: 1-Piece Non-Metallic Raceway Elbows

Reducing Fitting, 4x4 Fiber Duct, Cover Included, ABS, Yellow

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Inside corner fitting. Used to join cove raceway at inside corners. Maintains a minimum 1" bend radius of cabling.

Category: 1-Piece Non-Metallic Raceway Elbows

TG-70 raceway base, 8 foot length. Supplied with pre-punched mounting holes.

Category: 2-Piece Non-Metallic Raceway

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Raceway two-piece base and cover, TG-70, Off White, 8'

Category: 2-Piece Non-Metallic Raceway

Office Furniture Raceway End CapEnd cap fitting. Used to terminate office furniture raceway. Supplied with adhesive tape. Office Beige.

Category: 1-Piece Non-Metallic Raceway End Fittings

OFR20 Single Channel, Low Voltage 1-piecOne-piece single channel low voltage raceway with adhesive tape backing for data cable routing along top of modular furniture partitions. Available in 8' lengths.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting. Used to join sections of Twin-70 raceway at outside corners. Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Tee Fittings