Search results

Grounding Bushing, 1 Inch, 14 - 4 AWG Lay-In Lug, Rated 150° Celsius, Malleable Iron/Zinc Plated Bushing, Aluminum Lay-In Lug Dual Rated CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Mini Circuit Breaker, Plug-In, Type HOM, 2-Pole, 50 Amp, 120/240V

Category: Residential 2-Pole Circuit Breakers

Ground Clamp, Cable to Water Pipe or Copper Tube, 10 AWG to 2 AWG, Pipe Size 1/2 Inch to 1 Inch, Cast Bronze, Silicon Bronze Hardware, Direct Burial Rated

Category: Bare Wire Ground Clamps

Switch/Outlet Box, 1-Gang, Old Work, Non-Metallic, Depth: 3-5/8", Cubic Inches: 20". Includes: Ears, Clamps, (x50/Case)

Category: Non-Metallic Old Work Switch / Outlet Boxes

PVC Cement, Medium Body, Low-Voc, Fast-Set, Clear, 1 Quart

Category: PVC Cement

Conduit Hanger with Bolt, Diameter 2 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

3" x 2", 1-Gang, Gangable with Ac/mc/flex Clamps, Switch Box with Plaster Ears & Cable Clamps, Drawn, Metallic. Depth: 3-1/2". Side Knockouts: (7) 1/2" & (4) Priouts. Bottom Knockouts: (1) 1/2". Cubic Inches: 18.0".

Category: Metallic Switch / Outlet Boxes

(3) 4/0 AWG and (1) 2/0 AWG Bare Ground, SE/SER, 600V, Aluminum Conductor, PVC Jacket, 500 ft. Reel.

Category: Aluminum SER Service Entrance Cables

Mechanical Lug, Aluminum, 1 Hole Mount, Dual Rated for Copper or Aluminum Conductors, 6 AWG to 2/0 AWG, Bolt Hole: 1/4 Inch

Category: 1-Conductor Aluminum Mechanical Lugs

Tamper Resistant Duplex Receptacle, 20A, 125V, White, NEMA 5-20R, 2-Pole, 3-Wire, Narrow Body, Straight Blade, Commercial Grade, Self-Grounding, Side Wired Steel Strap

Category: Tamper Resistant Commercial Grade Receptacles

Four Hole Corner Angle - Electro-Galvanized Finish (EG) Bolt Hole Diameter 9/16"

Category: 90 Degree Strut Channel Corner Connectors

2-1/2 Inch EMT Conduit, Steel, 10 Foot Length

Category: Straight Steel EMT Conduit

Neutral/Ground Lug for BR and CH Series Loadcenters, 125 AMP, #2/0 Maximum Wire Size, Used As an Add-on Neutral or Ground Lug. Suitable For Use with Copper Or Aluminum Conductor.

Category: Load Center Lug Kits

SPRING NUT, 1/4-IN.-20 THREAD, 1/4-IN. NUT

Category: Strut Channel Spring Nuts

4" Square, Exposed Work Cover, Type: (2) GFCI/Decorator Receptacle, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3".

Category: 4" Square Metallic Box Covers

(3) 6 AWG and (1) 6 AWG Bare Ground, SE/SER, 600V, Aluminum Conductor, PVC Jacket, Cut to Length

Category: Aluminum SER Service Entrance Cables

8 AWG, THHN/THWN-2, Stranded Copper, 600V, Red, Cut to Length

Category: 8 AWG Stranded Copper THHN

Bushing, Type Insulating, Threadless, Size 2 Inch, Non-Metallic, For Use With EMT Conduit

Category: EMT Bushings

Mechanical Lug, 2 Conductor, 1 Hole , 6 - 250 AWG, 3/8 Inch Stud, Aluminum/Tin Plated, CU/AL Rated

Category: 2-Conductor Aluminum Mechanical Lugs

EMT Set Screw Coupling, 1 1/4 inch, Material: Steel

Category: Steel EMT Set Screw Couplings

Cord Connector, Low Profile, Size: 1/2 inch, Strain Relief, Cord Range: 0.200 Inch - 0.472 Inch, Material: Non-Metallic.

Category: Straight Low Profile Non-Metallic Cord Grips

3/4" Diameter, Reduced Wall Steel Conduit, Metallic, Hot Dipped Zinc Galvanized Low Carbon Steel, 100 feet Coil.

Category: Flexible Steel Conduit

Electrical Color Coding Tape, Vinyl, 3/4 Inch x 66 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, Brown

Category: Color Coding Tape

Conduit Bushing, Insulating, 3/4 Inch, Threaded, Plastic, Rated 105° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings