Search results

W-mold V20ig512 3w Iso-grd Pl ugmold

Category: Single Circuit Steel Plugmold

Steel, Cover, 2100 Series. Size: 5' Length, 1.188" Width. Ivory.

Category: Small 2-Piece Metallic Raceway Covers

Two circuits with two 20A resettable circuit breakers. Twenty-four 20A outlets with T-slots, black housing. 12' (3.6m) cord. Length 48" (1.3m).

Category: General Duty Power Strips

8IN CORE-UNWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze.á Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartments: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly (tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, and One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Black

Category: Assembled Poke-Through Units

6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Aluminum Powder-Coat.

Category: Poke-Through Cover Assemblies

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Brass

Category: Assembled Poke-Through Units

Cover Assembly, Round, Diameter: 8", BrassCover Assembly, Round, Diameter: 8 Inch, Brass, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Poke-Through Cover Assemblies

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Gray

Category: Assembled Poke-Through Units

1" trade size barriered conduit. Also includes BX/MC cable connector. Must be activated with 200 Series or 241 Series Service Head and FIFP or FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification. NOTE: This Poke-Thru requires a minimum 2 1/32" (52mm), 2 1/8" (54mm) maximum diameter hole.

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

8" Poke-Thru Device, Recessed, Evolution Series, Brass8" Poke-Thru Device, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist Open. Recessed: 3-1/4", No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

Poke-Thru Assembly, Diameter: 6", Type: (2) Duplex, MetallicPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Recessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (GY) painted gray."

Category: Assembled Poke-Through Units

Aluminum, Flush Style Cover with Solid Lid, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. Brass

Category: Square / Rectangle Recessed Box Covers

Wire Duct End Plug, Walkerduct, Color: White. Size: 3-1/8" x 1-1/4". Used to Seal End of No. 2 Duct.

Category: Wire Duct Covers

Fully finished enclosure designed to manage and store A/V equipment in an air handling plenum space above a false ceiling.

Category: Media Center Enclosures with Covers

Raceway Device Box, 1-Gang, 2-3/4" Deep, IvoryRaceway Device Box, 1-Gang, 2-3/4" Deep, Ivory, V2100 Series

Category: 1-Gang Raceway Device Boxes

Custom Tele-Power Series Aluminum Power/Data Pole, 20A, 15'

Category: Aluminum Power Poles

90 degree full capacity divided internal elbow that provides a 2" (51mm) cable bend radius for fiber optic/UTP/STP installations. One pair of DS4001 Couplings included. Black

Category: Large 2-Piece Metallic Raceway Elbows

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Black. Outlets (12") O/C: Total Outlets: (3) 15A, 125V: Single Circuit, Decorator Outlets.

Category: Single Circuit Tamper Proof Plugmold

WMD AL4320B-1000 BASE 120IN BLANK

Category: Plugmold Bases

6IN U CHANNEL COUPLING

Category: Wireway U-Connectors