Search results

Fully finished enclosure designed to manage and store A/V equipment in an air handling plenum space above a false ceiling.

Category: Media Center Enclosures with Covers

6IN U CHANNEL COUPLING

Category: Wireway U-Connectors

4IN U CHANNEL COUPLING

Category: Wireway U-Connectors

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Black. Outlets (12") O/C: Total Outlets: (3) 15A, 125V: Single Circuit, Decorator Outlets.

Category: Single Circuit Tamper Proof Plugmold

9.75" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Round Recessed Box Covers

Furniture Feed Cover Assembly, 6 Inch Round, Evolution 6AT Series, Style: Surface, Metallic, Cover Type: Screw Plug - (1) 3/4 Inch, (1) 2 to 1-1/4 Inch. Material/Finish: Aluminum Die-Cast/Brass Powder-Coat, Includes: (1) 3/4 Inch Conduit Connector, (1) 1-1/4 Inch Conduit Connector and (1) Service Divider. For Tile, Carpet and Wood Flooring. Caution: Not for Use on Concrete Pours Less Than 4 1/2 Inch; Not For Use When Concrete is the Finished Floor.

Category: Poke-Through Cover Assemblies

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Aluminum

Category: Poke-Through Cover Assemblies

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BK) painted black.

Category: Assembled Poke-Through Units

6" Round Cover, Flush, Recessed Evolution 6AT Series,Gray6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

6IN CORE-UNWIRED-FLUSHFor tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Includes one (1) 6TS Tile Shim. Brass

Category: Assembled Poke-Through Units

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Brass

Category: Poke-Through Cover Assemblies

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

WMD AL5200C-10US AL5200 COVER

Category: Large 2-Piece Metallic Raceway Covers

8IN CORE-PREWIRED-FLUSHWAL 8ATPNK 8IN CORE-PREWIRED-FLUSH

Category: Assembled Poke-Through Units

Wall Duct Fitting, T-Unit, Body, 10"

Category: 2-Piece Non-Metallic Raceway Tee Fittings

WM UTCM5 NON-METALLIC 3-COMPA

Category: Non-Metallic Overfloor Raceway

Designed to provide a solid secure panel to protect the audio/video equipment loaded within the enclosure. Panel is designed to work with the ECB2S, ECB2S-CR, and ECB2SRLNK boxes and is powder coated white to match the enclosure. The panels are field paint-able to match the room decor. Includes a lock and key.

Category: Rack End Panels

Surface Style Cover with Floor Insert, Flange, Material/Finish: Die Cast Aluminum/Aluminum

Category: Square / Rectangle Recessed Box Covers

Aluminum surface style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

Surface Style Cover with Solid Lid, 16-3/8" x 12-1/2", Die Cast Aluminum, Gray

Category: Square / Rectangle Recessed Box Covers

WMD APMT12W2 ADORNE 12IN MODU

Category: Undercabinet LED Lighting

Non-Metallic, Flexible Corduct. 1200 Series. Size: 5' Length, 2-1/2" Width, 14/32" Height. Color: Brown.

Category: Non-Metallic Overfloor Raceway

Cvr Assy-brushed Aluminum-flushFlanged Cover Assembly, Material: Aluminum, Size: 6 9/16 in Length, 7 3/4 in Width

Category: Square / Rectangle Recessed Box Covers