Search results

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

In-Wall Storage Box with Flange and Cover, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 19", H: 19" , D: 5", Black

Category: Recessed Home Entertainment Boxes

5400 Series T Fitting. For branching raceway at right angles. Finish - White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

For covering single receptacles - 1.41" (36mm) diameter. Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

For closing open end of 5500BD3 Raceway. Three 1/2" trade size KOs for end feed. White

Category: 2-Piece Non-Metallic Raceway End Fittings

For right angle turns around internal corners. 1" [25mm] bend radius.

Category: 1-Piece Non-Metallic Raceway Elbows

Abandonment available in black (BK) or gray (GY). NOTE: To abandon the RC7 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Poke-Through Cover Assemblies

MXN2F21WH ENT END FITTING

Category: 2-Piece Non-Metallic Raceway End Fittings

1/2" trade size KO in center. For use with 5735, 5737, 5737A, 5738, 5738AF, 5739, 5739A, or 2135 Device Boxes. Converts these boxes into pull or junction boxes for hanging lightweight pendant fixtures with 1/2" trade size pipe stems. White

Category: Round Raceway Open Base Boxes & Covers

Single-compartment pole. Nominal material thickness .040" (1.0mm). Furnished unwired without outlets. Mounting hardware, entrance end fitting and ceiling trim plates furnished. Length: 12'5" (3.8m).

Category: Steel Power Poles

Cover Plate, Powder-Coated Aluminum, Color: Gray

Category: Square / Rectangle Recessed Box Covers

6' Steel Plugmold Multioutlet Strip with 5 single receptacles spaced 12"

Category: Single Circuit Steel Plugmold

WMD EHWBC8-WH 8-GANG HINGED C

Category: Recessed Compartment Box Covers

Wm Alds4017 Alds4000 Internal

Category: Large 2-Piece Metallic Raceway Elbows

For use with multi-channel raceway device brackets and WallSource device mounting brackets. Angled exit provides additional mounting depth required for audio/visual connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two CM2 Series modules or two CM2 Series modules or two 2A inserts. Fits 5507 Series Faceplate opening. Finish - Ivory

Category: Communication Module Adapters For Metallic Raceway

Takeoff Connector. For 90 degree tee connection at any point along a run of 6000 Series Raceway. Finish - Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Floor Box Activation with Brass Flange

Category: Assembled Recessed Round Boxes

Mounting Bracket for Evolution 8-Gang Floor Box

Category: Recessed Floor Box Service Fittings

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Ten 20A outlets with t-slots, 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 4" (101mm). 20 Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: General Duty Power Strips

6' Steel Plugmold Multioutlet Strip with 6 duplex receptacles spaced at 12", GBA Finish - Ivory

Category: Dual Circuit Steel Plugmold

Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment.

Category: Recessed Floor Box Service Fittings

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units