Search results

4-cutter, Solid Carbide Tip For Up To 3 Life In Rebar, Drills More Accurate Holes, Application: For Anchoring, Flute Length: 4in, Overall Length: 6in, Diameter:0.19in

Category: SDS Masonry Bits

M18™ Cordless 2-Speed Grease Gun, Includes (1) Hose Sleeve ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Grease Guns

Lineman's Pliers with Crimper, High Leverage, Length: 9", Jaw Length: 1.58", Knife Length: 0.78", Pipe Reamer: Up to 1-1/2".

Category: Combination Pliers

Cobalt Step Drill Bit, #1 (1/8-1/2"), 2.93 Inch Length, 6.43 Inch Height, 0.75 Inch Width

Category: Step Bits

AIR-TIP™ Conduit Line Puller Kit, Includes (3) Different Tools To Aid In Line Pulling Applications, A Flexible Design Tip For Use On 1/2" - 1" Conduit, A Flexible Design Tip For Use On 1-1/4" - 1-1/2" Conduit, And A 2" - 4" Conduit Tip

Category: Pull Line Packages

Milwaukee; Hole Saw; Ice Hardened; Hole Diameter: 5 In; Rpm Mild Steel: 65 Rpm;rpm Stainless Steel: 30 Rpm; Rpm Cast Iron: 45 Rpm; Rpm Aluminum: 90 Rpm

Category: Bi-Metal Hole Saws

Male Tab, Vinyl-Insulated, Wire Range: 16 - 14, Mates with 0.25-in wide female tab, Color: Blue, 25/PK

Category: Male Vinyl Insulated Tabs

Vinyl-Insulated, Wire Range: 16 - 14, Insulation: Vinyl, Blue, Pack of 100

Category: Vinyl Insulated Butt Connectors

Cold Shrink End Cap, Range: 0.63 - 1.18 Inch, Color: Black

Category: Low Voltage Cold Shrink End Caps

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Clear, Shrink Ratio: 2:1, Size: 1/2", Expanded Insulation Diameter: 0.500", Recovered Insulation Diameter: 0.250", Tube Length: 48". Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

6 Piece SHOCKWAVE™ Impact Duty 6" Magnetic Nut Driver Set

Category: Nut Driver Sets

Particulate Respirator, Nose Foam, Nose Clip, Patented Filter Media, Two Straps, N95 Approved, Minimum order of 160

Category: Respirators

Heat Shrink, Heavy Wall, Cross-Linked Polyolefin Tubing, 1 kV, Conductor Range: 250 MCM - 750 MCM, Shrink Ratio: 3:1, Insulation Diameter Range: 0.65" - 2.00", Relaxed Tube Length: 12". Provides: Abrasion, Corrosion and Chemical Resistance in Submersible and Direct Burial Applications.

Category: Heavy Wall Heat Shrink

Ship Auger Bit, Diameter: 1-1/8", Length: 18", Shank: 7/16" Hex, Flute Length: 15"

Category: Long Ship Auger Bits

Wraparound Heat Shrink Cabel Repair Sleeve, 500 - 1000 MCM, Length 47.2 Inch, 1000 Volt Rated, Modified Cross-Linked Polyolefin, Black

Category: Heat Shrink Repair Kits

Water Activated Paper Tape, Natural, Light Duty Reinforced, 72 Millimeter x 450 Feet, 10 Rolls/Case

Category: Box Sealing Tape

Polyethylene Tape 5423, 5/8 X 18 Yards, Rubber Adhesive

Category: Duct Tape

Right Angle Hole Hawg, M18, Cordless, RPM: 0 - 1500, Voltage: 18V, Auger Bit: Up To 1-1/4", Self Feed Bits: Up To 2-9/16", Weight: 9 lbs ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Right Angle Drills

Electrical Color Coding Tape, Vinyl, 1/2 Inch x 20 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, Orange

Category: Color Coding Tape

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Black, Shrink Ratio: 2:1, Size: 3/32", Expanded Insulation Diameter: 0.093", Recovered Insulation Diameter: 0.046", Tube Length: 6". Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications. Diameters Included: (30) 3/16", (28) 1/4", (20) 3/8", (14) 1/2", (6) 3/4", (4) 1".

Category: Heat Shrink Kits

Drill Bit, Masonry, 44 Magnum Carbide, Length: 8", Diameter: 5/8", Shank: SDS.

Category: SDS Masonry Bits

M18 BRUSHLESS PACKOUT FAN

Category: Heavy Duty Portable Fans

M12™ RedLithium™ High Output™ CP2.5 Battery Pack, 12 Volt, 2 Inch Length, 0.45 lb Weight, 3.3 Inch Height, 1.9 Inch Width

Category: 12 Volt Cordless Tool Batteries & Chargers

Reciprocating Saw Blade, Sawzall, The Ax, 5 TPI, Length: 9-Inch, Includes (1) Blade

Category: Titanium Edge Wood Cutting Reciprocating Saw Blades