Search results

Liquidtight Connector, 1 Inch, Straight, Bullet Type, Non-Metallic, For Use With Type B Liquidtight Conduit

Category: Straight Non-Metallic Liquidtight Flex Connectors

Miniature Cable Tie, 6.38 IN L x 0.1 IN W x 0.05 IN THK, Nylon/Polyamide 6.6, Natural

Category: Non-Releasable Cable Ties

CARFLEX, 2 Inch Diameter, Liquidtight, Non-Metallic, UL Listed for Outdoor Use & Sunlight Resistant, Gray. 100 Foot Reel.

Category: Liquidtight Flexible Non-Metallic Conduit

Bushing, 3/4 Inch Diameter, Non-Metallic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Adjustable Floor Box for Duplex Receptacle, 1-Gang, Non-Metallic, Ivory, Depth: 3-1/3", Cubic Inches: 20", Adjustments: 0 - 1-3/4", Includes: Receptacle (15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Straight Blade, Commercial Grade, Self Grounding, Side Wired, Steel Strap) and New & Old Work Brackets

Category: Recessed Adjustable Floor Boxes

GE TSMR415CSCU MSLC MB RGLS 1

Category: Meter Mains - with Distribution

3/4 Inch Blue Electrical Non-Metallic Tubing (ENT), 1000 Foot Reel

Category: Blue ENT Conduit

LD CTR MCB 200A 08/16 AL N3R GR PON UL

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

Liquidtight Connector, Straight, 1 Inch Diameter, Aluminum, For Use In Corrosive Environments

Category: Straight Aluminum Liquidtight Flex Connectors

Strain Relief Straight Liquidtight Cord Connector, 1/2 IN, .125 To .275 IN Openings, Nylon, Black

Category: Straight Non-Metallic Cord Grips

Strain Relief Straight Liquidtight Cord Connector, 3/4 IN Trade, 1/2-3/4 IN Openings, Polyamide/Nylon 6.6

Category: Straight Non-Metallic Cord Grips

Pipe Spacer, Material: Malleable Iron - Hot Dipped Galvanized, Capacity: 1/2" to 1" Rigid/IMC Conduit

Category: Clamp Backs - Iron

GEN AF43S PNLBD FRONT SURFACE

Category: Panelboard Trims

Main Breaker Retainer, for use with TM/TLM1212CCU Mod 2 Current Model

Category: Circuit Breaker Hold Down Kits

PRO-STK A2 3 POLE M BKR KIT

Category: Panelboard Main Breaker Kits

Compression Lug with Sight Hole, 6 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Blue, Die Code 24, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

Ground Lug Kit, 600 - 1200 Amp, 600 Volt AC, 3 x 2 AWG - 250 MCM, Cu/Al

Category: Load Center Neutral & Ground Bars

A3 CONTACT BLOCK 1NO+1NC

Category: 30mm Contact Blocks

Panel Board, Interior, 225 Amp, 208Y/120 Volt AC, 30 Circuit, 3-Phase, Copper Bus, Feed Through, 43.5 Inch Height, 3-TGL2 Ground Bars Included

Category: Panelboard Interiors

Mold Case Circuit Breaker, 2 Poles, 200 Amps Rated at 240V AC and 250V DC, Fixed Trip Point with Thermal Magnetic Trip Device

Category: 240-277V Rated Molded Case Circuit Breakers

30 Amp, 3-Pole, Plug-On Circuit Breaker, Q-Line Series, 10 kAIC, 120/240 VAC.

Category: Residential 3-Pole Circuit Breakers

Disconnect Switch, Fusible, 200 Amp, 600 Volt AC, 3-Pole, NEMA 3R, Heavy Duty

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

Wire Joint, High Temperature, Nylon Insulated, (4) 18 to (2) 12 AWG, 600 Volt, Rated at 150° C, Package of 500 Each

Category: Insulated Copper Crimp Connectors

- Designed For Residential And Light Commercial Applications Where Duty Isnot Severe- Listed Per Ul Standard 98, Enclosed And Dead Front Switches- Csa Certified- Ul Service Entrance Rated When Installed In Accordance With The National Electrical Code- Meets NEMA Enclosed Switch Standard Ks1-1990 For Type General Duty- 60c And 75c Conductor Rating- Features Quick-make, Quick-break Mechanisms (30-200 Amps)- 30-200 Amp Fusible Switches Are Rated 100,000 Rms Amps, Sym Ic When Used With Class R Fuses. Refer To Buylog To Order Appropriate Class R Fusing Kit- Bottom-feed Version Available For 200-600 Amp, NEMA 1 Only- Fusible And Non-fusible Switches Available(consult Buylog For Interrupt Ratings)

Category: 2-Pole 240 Volt Fused General Duty Safety Switches