Search results

2 Inch Liquidtight Flexible Metal Conduit (LFMC), Type HCX - Extreme (High/Low) Temperature, -76°F to +302°F (-60°C to +150°C), Zero Halogen, Black, 50 Foot Coil, Galvanized Steel Core, Thermoplastic Rubber (TPE) Jacket, UV Resistant, Extra Corrosion Resistant, Oil Resistant

Category: Liquidtight Flexible Metallic Conduit

Liquidtight Connector, 45 Degree, 2-1/2 Inch, Insulated, Malleable Iron

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

1 N.O. / 1 N.C., Side Mount, Auxiliary Contact Block, A-Line Series, 600V Rated. For use with AF116 - AF370 Frame Contactors.

Category: Starter & Contactor Auxiliary Contacts

Adaptaflex® PAFH16/BL/50M Type PA Heavy Weight Non-Metallic UV Resistance Flexible Conduit With Fine Pitch, 16 mm Trade, 11.3 mm ID x 15.8 mm OD, 50 m L, Nylon/Polyamide 6

Category: Corrugated Nylon Tubing

Abb Af16-40-00-13 Af16 4 Pole Contractor coil Voltage-250v Ac/dc

Category: IEC Contactors - 4-Pole

1 N.O. Contact Block & Contact Block Holder. 22.5mm, 600V Rated, Front Mount, Non-Metallic. For use with: Pilot Devices, Pushbuttons & Selector Switches.

Category: 22mm Front Mount Contact Blocks

Liquidtight Cord Connector, Strain-Relief, 2-1/2 Inch, Cable Range: 1.937 - 2.187 Inch, Zinc Die Cast

Category: Straight Die Cast Zinc Cord Grips

Female Reducing Bushing, 3/4 Inch x 1/2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit.

Category: Iron Alloy Reducing Bushings

Insulated Ferrule, 12 AWG, .889" Long, Tin Plated Copper, Gray

Category: Single Insulated Ferrules

Ring Terminal, Nylon Insulated, 8 AWG, 1/4 Inch Stud, 600 Volt, Red, Package of 25 EA

Category: Nylon Insulated Ring Tongues

Heat-Shrinkable HSC Series End Caps for Cable Range 8 - 6 AWG, Expanded Diameter 0.51 inch, Length 2.5 inch, rated for 600 Volt, 90 degrees continuous use, Material: Cross-linked polyolefin with thermoplastic adhesive liner, Black

Category: Heat Shrink End Caps

Nylon Insulated Expanded Entry Ring Terminal, Length 1.48 Inches, Width .72 Inches, Maximum Insulation .250, Bolt Hole 1/2 Inch, Wire Range #12-#10 AWG, Color Yellow, Copper, Tin Plated

Category: Nylon Insulated Ring Tongues

Heater Element, for CR104H,Y, 14.8 Full Load Amps

Category: Heater Elements - GE CR123 Series

3-1/2 Inch Insuliner Sleeve, Nylon for Use with Rigid/IMC/EMT Conduit

Category: Throat Liners

CAR LT100G 1" GRAY STRAIGHT

Category: Straight Non-Metallic Liquidtight Flex Connectors

GED 463M60NJA10A0 120V 6NO NM1 CNCTR

Category: Enclosed Lighting Contactors

Ring Terminal, Vinyl Insulated, 18 - 14 AWG, 3/8" Bolt Hole, Blue, 1000/PK

Category: Vinyl Insulated Ring Tongues

Liquidtight Strain Relief Connector, 45 Degree, 1/2 Inch Diameter, 0.250 - 0.375 Inch Cable Opening, Malleable Iron

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

22.5 mm, Non-metallic, Selector Switch Operator, Black Bezel, Knob Type, Non-illuminated, Black, 2-Position, 90° Throw, Operating Mode: Maintained, Maintained. NEMA Rating: 1, 3R, 4, 4X, 12, 13. ***Must add Contact Block Holder***

Category: 22mm Knob Selector Switches

Floor Box Cover, Round, (1) 1-1/4" Screw Plug, Color: Slate, Non-Metallic

Category: Round Recessed Box Covers

Liquidtight Connector, 90 Degree, 2 Inch, Insulated, Steel With Zinc Chromate Finish, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Steel Liquidtight Flex Connectors

Bulkhead Fitting, 3/4 Inch, Insulated, Sealing Ring, Aluminum

Category: Aluminum Through-Bulkhead Conduit Hub Fittings

Selector Handle Shaft. Size: 6 x 330 mm (12.99"). For use with Selector Handles.

Category: Disconnect Switch Shafts

Pistol Handle. Handle Length: 4.9"/145 mm. Color: Black. Environmental Ratings: NEMA 1, 3R, 12. Defeatable, Lockable. For use with 12 mm Shafts.

Category: Disconnect Switch Handles