Search results

Conduit Body Gasket, Type: Solid, Size: 1/2 Inch, Spec 5, Composition Fiber, For Use With Screw/Clip-On Cover

Category: Fiber Conduit Body Gaskets

Conduit Body, Type: LB, Size: 1/2 Inch, Form 85, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies

OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 1-1/8 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Square Head Close-Up Plugs

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-45/64 - 2-61/64 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 2-1/16 IN Length

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1 IN, Conductor Range: 0.625 - 0.75 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: Straight Malleable Iron Cord Grips

OZ-Gedney BC-G Series Flat Top Design Cover, 1 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A

Category: Iron Conduit Body Covers

OZ-Gedney Type 15-G Conduit Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 23/32 IN Width, Length: 2-7/32 IN, 1-1/8 IN Height, Trade Size: 3/4 IN, Third Party Certification: CSA 9795, Applicable Third Party S

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3-1/2 IN Outside Diameter, 0.88 IN Inside Diameter, 2-1/2 X 1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA

Category: Reducing Washers

Rigid Compression Connector, Insulated, Concrete Tight, Size: 1-1/4 Inch, Material/Finish: Malleable Iron/Zinc

Category: Steel Rigid Conduit Threadless Connectors

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1-1/2 IN, Connection: Tapered FNPT Hub, Dimension A: 4 IN, 3 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I, Di

Category: Iron Rigid Conduit Elbows

2 IN PIPE STRAP RGD & IMC

Category: Malleable Iron 1-Hole Conduit Straps

U-Bolt w/ Hex Nuts, 2-1/2", Galvanized Steel

Category: U Bolts

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-1/16 IN, 1/4 IN Mounting Hole Width, 1 Holes, 1/4 IN Width, Trade Size: 1/2 IN, Dimension A: 2-1/8 IN, Applicable Third Party Standards: Federal Specification FF-S-76

Category: Steel 1-Hole Conduit Straps

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 3/8 IN Height, 4-5/8 IN Width, Size: 3-1/2 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Steel Conduit Locknuts

Conduit Outlet Box, Hazardous Location, Cover Threads into Box, Type GUALB, 1 Inch Hubs, Aluminum Cover, Malleable Iron Body, Threaded for Rigid Conduit or IMC.

Category: Explosion-Proof LB Conduit Outlet Boxes

OZ-Gedney Type RB Reducing Bushing, Size: 2-1/2 X 1 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 1/2, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 1/2-14 Tapered FNPT, Dimensions: 1-1/2 IN Diameter X 1-3/8 IN Length, Box Wall Thickness: 7/32 IN, Third Party Certification: UL

Category: Malleable Iron Conduit Hubs With Grounding

Conduit Bushings, Insulated, Threaded, 1-1/2 Inch, Malleable Iron/Zinc Plated Body, Thermoplastic Insulator With Maximum Temperature Rating of 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZG 325-R 1-1/4 TO 3/4 RDC BS

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 1 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Fiber Conduit Body Gaskets

Conduit Locknut, Trade Size 2-1/2 Inch, Diameter 3.54 Inch, Thickness 0.39 Inch, Material Aluminum, Installation 8 TPI Threaded, Approval UL 514B, CSA C22.2, Applicable Standard W-F-408E, NEMA FB-1, Application Used Where there is a Concern with Fasteners Becoming Loose, Used On IMC/Rigid Conduit

Category: Aluminum Conduit Locknuts

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.375 - 1.75 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated B

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type GUAX Conduit Outlet Box, Number Of Outlet: 4, Malleable Iron Body/Cover, Size: 1-1/4 IN, Cable Entry: (4) 1-1/4 IN Hubs, 30 CU-IN Capacity, No, 3-3/4 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 4-1/4 IN Width, 3 IN Depth, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof X Conduit Outlet Boxes

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.4 - 1.6 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 1.93 IN Throat Inside Diameter, 5/8 IN Thread Length, Dimensio

Category: Straight Malleable Iron Cord Grips