Search results

StrongHold™ Ring Terminal, Vinyl Insulated, 8 AWG, 3/8 Inch Stud Size

Category: Vinyl Insulated Ring Tongues

Insulated Ferrules on Mini-Reel, Single Wire, 14 AWG, Blue DIN End Sleeve, 0.31 Pin Length

Category: Single Insulated Ferrules

Right Angle Female Disconnect, Nylon Fully Insulated, 22 - 18 AWG, .25" Tab, Red

Category: Female Nylon Insulated Wire Disconnects

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.34" to 0.36" (8.8 to 9.3 mm), Made of Heat-Stabilized Nylon 6.6, For Use In Indoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 200

Category: Cable Tie Bases

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Heat Shrink, Thin Wall, Diameter: 0.09 Inch, Minimum Expanded I.D.: 0.093 Inch, Maximum Recovered I.D.: 0.046 Inch, 600 Volt, Ratio: 2:1, Color: Black, Material: Cross-Linked Polyolefin, Order of 1 Each = 1 Reel of 100 Feet.

Category: Thin Wall Heat Shrink

Compression Lug, 1-Hole, 2/0 AWG, 3/8 Inch Stud, Aluminum

Category: 1-Hole Long Barrel Aluminum Compression Lugs

Copper Patch Cord, Cat 6, Off White UTP Cable, 3 Feet

Category: Category 6 Patch Cords

MP Cassette, Continuous Tape, Vinyl, 0.5 Inch Width x 23 Ft. Length, Black on Yellow

Category: Labeling Tape

Compression Lug, Copper, 2-Hole, Standard Barrel with Window, 250 kcmil Cable, 1/2 Inch Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Copper Compression Lugs

The adhesive mount in white is mounted with rubber adhesive tape and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments

Category: Cable Tie Bases

Fixed Diameter Cable Clamp, Nylon, White, 1" Max Bundle, Pack of 100

Category: Cable Clamps & Clips

SDX Precision Molded Plate (AQUA), 50/125um Multimode Laser Optimized OM3/4, Duplex SC, 6 fibers, Zirconia Ceramic Sleeve, Color: Aqua.

Category: SC Fiber Distribution Plates

Panduct® type FS solid wall wiring duct, 2 W x 3 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Halogen Free Slotted Wiring Duct, 1-1/2" x 2" x 6', White, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Cable Tie, Intermediate Cross Section, 9.7" Long, .145" Wide, .052" Thick, Nylon, Natural Color, Plenum Rated, 40lb Tensile Strength, 2-1/2" Max Bundle Diameter, 100/Pack

Category: Non-Releasable Cable Ties

Cable Tie Hand Tool, Dark Gray, Red, 7.8 x 1.28 Inch, PK1

Category: Cable Tie Tools

Pan-Ty® lashing tie, extra-heavy cross section (no buckle design), 21.8 (554mm) length, weather resistant nylon 6.6, black.

Category: Non-Releasable Cable Ties

The 4-way adhesive backed cable tie mount in ivory is mounted with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed for indoor environm

Category: Cable Tie Bases

Fiber Indoor-Outdoor Stranded Tube Armored (Interlocking Aluminum) Cable, Plenum (OFNP), 9um Singlemode OS2 144 Fibers

Category: Single Mode Fiber Optic Cable

Ring Terminal, Nylon Insulated, 16-12 AWG, #8 Stud Size, Heavy Duty

Category: Nylon Insulated Ring Tongues

NetRunner Vertical Cable Manager Center Mounting Bracket Kit, Black

Category: Rack Mounting Kits & Hardware

Ferrule, 12 AWG wire range, 0.39(10.0mm) length.

Category: Non-Insulated Ferrules