Search results

Compression Lug, Copper, 1-Hole, Flex, 350 kcmil Cable, 3/8 Inch Stud Hole., 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

Fiber Indoor-Outdoor Tight Buffer Armored (Interlocking Aluminum) Cable, Plenum (OFNP), 9um Singlemode OS2 6 Fibers

Category: Single Mode Fiber Optic Cable

4-Way Anchor-Mount Cable Tie Base, Uses #10 (M5) Screws, Weather-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

Mini-Com Executive Style Faceplate, 2-Port, Single Gang, Includes Label and Cover, International Gray

Category: Snap-In Wallplates

Compression Lug, Copper, 1-Hole, Flex, Long Barrel, 2/0 AWG, 3/8 Inch Stud Hole

Category: 1-Hole Long Barrel Copper Compression Lugs

Mini-Com Surface Mount Box, with Fiber Spool, 12-Port, Black

Category: Surface Mount Data, Video, & Audio Housings

Pin Terminal, Vinyl Insulated, 16 - 14 AWG, .49" Pin Length

Category: Vinyl Insulated Pin Terminals

Slotted Hinged Duct, PVC,4"X4"X6' ,Light Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Pan-Wrap™ split harness wrap, 1" (25.4mm), 100 ft. (30.5m) per reel, flame retardant polyethylene, black.

Category: Split Wall Loom Tubing

Panduct® type H hinged cover wide slot wiring duct, 1.5 W x 3 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.205/0.187 x 0.020" (5.2/4.7 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.78" (19.8 mm) long and 0.31" (7.9 mm) wide. The disconnect has a funnel entry configuration and a butted seam barrel. It comes in boxes of 1000.

Category: Female Nylon Insulated Wire Disconnects

Ferrule kit includes: #12 “ 6 AWG insulated DIN ferrules. Case includes: 50 pieces of FSD81-10, 20 pieces each of FSD82-12 and FSD83-12, 10 pieces of FSD84-12.

Category: Single Insulated Ferrules

Snap-In HDMI Coupler, 1.3 Type A, Female to Female, Cat 2, White

Category: Snap-In Fiber-Optic Jack Inserts

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.78" (19.8 mm) lo

Category: Female Nylon Insulated Wire Disconnects

PanZone® TX6A™ 10Gig™ Category 6A Copper UTP Zone Cord, Blue, Jack Module (White) to Modular Plug, 25 Foot Length, 23 AWG

Category: Category 6 Patch Cords

Grounding Busbar, BICSI 1/4" x 2" x 10" (6.4mm x 51mm x 254mm)

Category: Bus Bars

The Panduit® Patchrunner® 2 Vertical Cable Manager combines high-density capability and versatility, freeing up valuable floor space. The fully pre-assembled manager lowers overall costs and sets the standard for the entire cable management industry. Sin

Category: Rack Cable Management Devices

Used with CT-2600 to install Panduit PV8 and PK8 series large wire, vinyl and KYNAR insulated ring terminals.

Category: Wire Crimping Dies, Adapters, & Blades

TX6™ PLUS Category 6 UTP Copper Patch Cord, 24 AWG, Red, 10 Foot Length, Modular Plug on Each End

Category: Category 6 Patch Cords

Mini Com duplex adapter, mounts behind standard 106 NEMA faceplates, accepts two Mini-Com® Modules, Electric Ivory.

Category: Snap-In Wallplate Inserts

TX6™ PLUS Category 6 UTP Copper Patch Cord, 24 AWG, Red, 1 Foot Length, Modular Plug on Each End

Category: Category 6 Patch Cords

Thermal transfer component label, 4.00" W x 6.00" H, polyester, white, 1 label/row, 1000 pc. package quantity.

Category: Permanent Labels

FiberRunner® Adjustable Z Bracket, Used to offset Fiber-Duct™ System from mounting surface, adjustable from 1.5" (38mm) to 4" (101mm). Typically used on the front of an equipment rack.

Category: Fiber Optic Patch Cords

Outside Corner Fitting, Used To Join Sections Of T-70 Raceway At Outside Corners

Category: 1-Piece Non-Metallic Raceway Elbows