Search results

Horizontal Cable Management Cover, For Use With A 19-in. Or 23-in. Open-Frame Rack Cable Management System

Category: Rack Cable Management Devices

For fixed positioning on a wall or vertical surface with vertical socket. This CS480 Wall Bracket, CCSS48WJRV item fits 48.3mm Tube with a material of SS Type 304.

Category: Enclosure Mounting Bracket Kits

Easy Swap Adaptor Plenums for Air Conditioners, Dimensions: 29" x 11.5" x 1.5"

Category: Enclosure Air Conditioner Adapter Plates

D-Box cabinets house 19-inch network equipment in public locations where low profiles are necessary. This D-Box Type 1, DBS362412G item measures 36.00x24.00x12.00 inches with a material of Steel colored Lt Gray.

Category: NEMA 1 Wall Mount Enclosures

HOF GP168 GLD PLATE MILD STEE

Category: Operator Adapters For Blank Cutouts

Divider used to divide CleanTray 45-degree elbow into two sections in frequent washdown areas. This Divider 45-Degree Elbow Top Cover CleanTray, CT66DEFC45SS item measures 6.00x6.00 inch with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

PROLINE 2000X700X800 FAN PKGGR

Category: Floor Mount Racks

AccessPlus Double-Hinged, NEMA Type 1, Load Rating: 250 lbs, Material: Steel, Dimensions: 23.6" x 24.41" x 30"

Category: Media Center Enclosures with Covers

Sectionalizing Cabinet, Bulletin Uj, Size/dims: 30.00x30.00x18.00, Material/finish: Steel/green

Category: Mobile Utility Cabinets

100 WATT 48V TEC W SHROUD

Category: Enclosure Air Conditioners

Wireway Reducer, 4" to 2" Reduction, Material: Stainless Steel

Category: Wireway Reducers

Bonding Cable Clamps, Size: 1/2 Inch, Material: Steel, These Clamps Provide Conductivity Required to Ground the Shielding on EMC-Shielded Cable.

Category: Steel 1-Hole Armored Cable Straps

HOF ATPTW TOUCH UP PAINT TRAF

Category: Touch Up Paint

Padlock Latch Kit, 3-Point, Clockwise/Counterclockwise, For Use With One Door Type 12 Enclosures, Stainless Steel

Category: Latch Kits For Single Door NEMA 12 Enclosures

Seals pushbutton holes, conduit openings and knockout openings against dust, dirt, oil and water. This Hol-Sealers Hole Seal, AS056MFB item measures 0.56-inch Diameter with a material of Mild Steel colored Brown.

Category: Painted Steel Enclosure Hole Seals

With pre-installed terminal blocks for three- and four-wire power distribution systems, this trough splits feeder circuit conductors into multiple branch circuit conductors.

Category: NEMA 1 Wire Trough

ProLine Disconnect Packages are ready-to-use enclosures offering flange-mount disconnect solutions. This ProLine-DD Disconnect Enclosure Type 12, PTDDC20186 item measures 2000x1800x600mm with material of Steel colored Lt Gray.

Category: NEMA 12 Floor Mount Disconnect Enclosures

Removable Hinge With Quarter-Turn Latch, Contoured, Type 12, 6.00x6.00x6.00, Gray, Steel

Category: NEMA 12 Hinge Cover Junction Boxes

Heavy duty multi-bay enclosure with a lower profile to maintain line of sight in factory. This Low-Profile 1-Door Disconnect Type 12, A42X1E2808 item measures 42.00x28.25x8.00 inches with material of Steel colored Gray.

Category: NEMA 12 Wall Mount Disconnect Enclosures

FLUSH MOUNT SCREW COVER

Category: Stainless Steel Wall Mount Enclosures

PROLINE RDC BKT FG 2000 X 100

Category: Rack Mounting Kits & Hardware

Wireway Closure Plate, Material: Stainless Steel, Dimensions: 4" x 4"

Category: Wireway Closure Plates

90-Deg Horizontal E-Bend Section (cULus Classified) is a cable runway for horizontal direction change. This 90-Degree Horizontal E-Bend Section (cULus), L90HB18W item fits 18.00in with a material of Steel finish White.

Category: 90° Horizontal Cable Tray Bend

SpectraCool SlimFit ACs designed with 3 space-saving mounting options to maximize footprint. This SpectraCool Slim Fit Indoor AC S06, S060326G060 item is rated for 300W 230V With RAC with a material of Steel colored Light Gray.

Category: Enclosure Air Conditioners