"DE_CS.1626215/A"

Multi-Bit Screwdriver Features Convenient On-Board Storage of 26 Different Precision Bits And A 3.5 mm Nut Driver, Includes Bits Needed To Repair Most Apple® Products, Barrel Contains Powerful Rare-Earth Magnets For Securing Bits And Fasteners, Industrial-Strength, Double-Sided Bits Are Conveniently Housed In The Handle, Eliminating The Need For A Bulky Bit Block Or Case, Stainless Steel Barrel Provides Great Impact And Wear Resistance, Spin Cap For Optimum And Precise Control, Cushion-Grip Handle For Maximum Comfort, Includes Phillips #000, #00, #0, #1, #2; Slotted 1, 2, 2.5, 3; Hex 0.9, 1.3, 1.5; Hex Security 2, 2.5; TORX® T3, T4; TORX® Security T5H, T6H, T7H, T8H, T10H; Standoff; Pentalobe 2, 5; Y000, Y0 Bits, Apple® Is A Trademark of Apple, Inc., TORX®Is A Registered Trademark of Acument Intellectual Properties, LLC.

Category: Multi-Bit Screwdrivers

Electronic Transformer, 12 Volt Halogen Lamp, 120 Volt Input

Category: Electronic Lighting Transformers

Chase Nipple, 1/2 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Union, 1 1/2 Inch, Female/Female, Aluminum, Conduit to Conduit, Explosion-Proof/Dust-Ignitionproof.

Category: Explosion-Proof Type UNF Unions

LED Lamp, 9 Watt, A19, 2700K, 800 Lumen, 120 Volt, 80 CRI, Dimmable to 10%, Omnidirectional, 60 Watt Equivalent, Standard Pack Qty: 6 *Sylvania Part # 74687*

Category: A-Type Traditional LED Lamps

Cable Tie Mount, 4-Way, Adhesive Backing, Nylon, 1" Long x 1" Wide (25.4 x 25.4 mm), Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 500

Category: Cable Tie Bases

Wide Finger Slotted Duct, PVC, Gray, 1in X 2in X 6ft, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 4 W x 3 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Eaton's Type Br Loadcenters (also Known As A Breaker Box) Include A One-piece Aluminum Or Copper Bus. This Absence Of Bolted Connections Virtually Eliminates The Chance Of Hot Spots Or Faults, Ensuring A Longer Product Life. Our Standard 14-3/8 In. Wide Enclosures Fit Snugly Between Wall Studs. A Variety Of Knockouts Allows For More Wiring Configurations, While Pre Drilled Mounting Holes Provide Easy Installation Of Additional Ground Bars, If Desired. Type Br Loadcenters Havea 10-year Warranty And Accept Type Br (1 In.) Breakers.

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

Panduct® type F narrow slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

LED T8 Type A/B Lamp: 2' T8, 8 Watt, 860 Lumens, 120-277v, 82CRI, Hybrid - Direct (A) & Bypass (B) - Single/Double Ended Connection. Color (CCT) Selectable: 3500-4000-5000K. 0-10V Dimming (Dimming is dependent on the ballast in Type A applications). Halco p/n 87100: 24T8-8-8CS-HYB-D-LED.

Category: T8 Tubular LED Lamps

USB Charger + Socket-Outlet, X Series, 15 Amp Socket, 4.8 Amp USB A/A, Duplex, Tamper Resistant, White, Matte Finish

Category: Tamper Resistant Receptacle / USB Combination Devices

LED Retrofit Lamp, E26 Medium Base, 45 Watts, 120-277V, 3000K

Category: Post Top / Site / Wall Pack LED Lamps

Liquidtight Sealing Gasket, 3 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Liquidtight Sealing Gasket, 1-1/2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Cellular Gateway, Industrial, Wireless, Frequency 700/800/850/900/1700/1800/1900/2100 MHz, 3G Service, DIN Rail Mount, Aluminum

Category: Wireless Access Points - Industrial

Dimmable Filament LED Lamp, 5.5W, Bulb: ST19, Base: Medium (E26), Vs: 120, Lumens: 400, Color Temp.: 2000K, Rated Life: 15,000 Hrs, Finish: Clear-Amber. Philips # 46167-3 / Mdl.# 9290012102

Category: Vintage Decorative LED Lamps

Heat Shrink, Thin-Wall, 3/0 - 4 AWG, 3:1 Ratio, Minimum Recovered: 0.75 Inch, Maximum Recovered: 0.31 Inch, Length: 48 Inch, Black

Category: Thin Wall Heat Shrink

LED Type A+B PL Lamp with FLEXCOLOR: Operates on existing magnetic ballasts or 120-277 VAC, 9 Watt, Color Temperature: 2700K/3000K/3500K/4000K, 1104-1243 Lumens (depending on color selected), Base: G24d

Category: LED Retrofit For Compact Fluorescent Lamps

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRC Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (2) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

4-Way Adhesive-Backed Cable Tie Mount, 1.5" Long x 1.5" Wide (38.1 x 38.1 mm), Nylon 6.6, Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 200

Category: Cable Tie Bases

Main breaker load centers arrive with a main breaker installed for a convenient and swift install. Main breakers allow for the user to stop the flow of electricity in the load center, shutting off all the power in the residence. The TM42422C features spaces for 42, 1" breakers, a 225A main ampere rating, 3 phases, and a combination surface/flush enclosure.

Category: 3-Phase Main Breaker Copper Bus Load Centers

Q-Rail Grounding Lug with T-Bolt, Aluminum

Category: Solar Grounding Hardware

The adhesive mount in white is mounted with rubber adhesive tape and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments

Category: Cable Tie Bases