"DE_CS.1626215/A"

LED Microwave Occupancy/Daylight Sensor, Input: 12 Volt DC, Output: 0-10 Volt DC, Hold Time: 1 Minute

Category: Passive Infrared Fixture Mount Occupancy Sensors

4-Way Adhesive-Backed Cable Tie Mount, 1.5" Long x 1.5" Wide (38.1 x 38.1 mm), Nylon 6.6, Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 200

Category: Cable Tie Bases

Main breaker load centers arrive with a main breaker installed for a convenient and swift install. Main breakers allow for the user to stop the flow of electricity in the load center, shutting off all the power in the residence. The TM42422C features spaces for 42, 1" breakers, a 225A main ampere rating, 3 phases, and a combination surface/flush enclosure.

Category: 3-Phase Main Breaker Copper Bus Load Centers

Scotch« Buried Barricade Tape 302 is a 4 mil thick, polyethylene film backing, buried barricade tape that is printed with a warning message. When buried 4 to 6 inches below the surface, it provides an early warning when digging before reaching a depth that could cause damage or injury to a line or worker.

Category: Underground Tape

Panduct® type G wide slot wiring duct, 1.5 W x 2 H, 6' length, PVC, adhesive, light gra, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

USB Charger + Socket-Outlet, X Series, 15 Amp Socket, 4.8 Amp USB A/A, Duplex, Tamper Resistant, White, Matte Finish

Category: Tamper Resistant Receptacle / USB Combination Devices

Union, Male/Female, 1-1/4 Inch, Explosion-Proof, Aluminum, For Connecting Conduit to Enclosure

Category: Explosion-Proof Type UNY Unions

Multi-Bit Screwdriver Features Convenient On-Board Storage of 26 Different Precision Bits And A 3.5 mm Nut Driver, Includes Bits Needed To Repair Most Apple® Products, Barrel Contains Powerful Rare-Earth Magnets For Securing Bits And Fasteners, Industrial-Strength, Double-Sided Bits Are Conveniently Housed In The Handle, Eliminating The Need For A Bulky Bit Block Or Case, Stainless Steel Barrel Provides Great Impact And Wear Resistance, Spin Cap For Optimum And Precise Control, Cushion-Grip Handle For Maximum Comfort, Includes Phillips #000, #00, #0, #1, #2; Slotted 1, 2, 2.5, 3; Hex 0.9, 1.3, 1.5; Hex Security 2, 2.5; TORX® T3, T4; TORX® Security T5H, T6H, T7H, T8H, T10H; Standoff; Pentalobe 2, 5; Y000, Y0 Bits, Apple® Is A Trademark of Apple, Inc., TORX®Is A Registered Trademark of Acument Intellectual Properties, LLC.

Category: Multi-Bit Screwdrivers

Bimetal Thermostat, Vertical Mount, 2-Pole, 22A, 120/208/240V, Temperature Range: 40°F to 80°F, Color: Almond

Category: Line Voltage Thermostats

Liquidtight Connector, 3/4 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Union, 1 1/2 Inch, Female/Female, Aluminum, Conduit to Conduit, Explosion-Proof/Dust-Ignitionproof.

Category: Explosion-Proof Type UNF Unions

Flat Feeder Terminal for Compact Busbars, 65 Amp, For 140MP Motor Protection Circuit Breaker

Category: Manual Motor Protector Busbars

IR Inspection Window 4 Inch x 4 Inch, Aluminum Anodized, Powder Coated, Hex Head Screws

Category: Thermal Imager Accessories

194U Terminal Shroud, 3 Pole, Base DIN Front Mount, Terminal Shroud, 3-Pole for 30 A, 60 A, 100 A

Category: Disconnect Switch Terminal Shrouds

Cellular Gateway, Industrial, Wireless, Frequency 700/800/850/900/1700/1800/1900/2100 MHz, 3G Service, DIN Rail Mount, Aluminum

Category: Wireless Access Points - Industrial

LED T8 Hybrid (Type A/B) Lamp: 4' T8, 12.5W, 1780-1816Lm, 120-277V, 82CRI, Hybrid Direct (Type-A) & Bypass (Type-B) - Single/Double Ended Connection. Color (CCT) Selectable: 3000-3500-4000-5000-6500K. 0-10V Dimming (Dimming is dependent on the ballast in Type A applications and requires Halco p/n 84979, LDM-T8195-100WM driver for Type-B applications). Halco p/n 87302: 48T8-12-8CS-HYB-D-LED2.

Category: T8 Tubular LED Lamps

The THLK3225 is a 3 pole plug-in kit designed to economically supply power to a subpanel. It is rated up to 225 A and can be used as a sub-feed or feed-thru lug.

Category: Load Center Sub-Feed Lug Blocks

The dynamic cable manager for panel strain relief in white is mounted with rubber adhesive tape. It is 1.12" long x 1.12" wide (28.4 x 28.4 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. The cable

Category: Cable Tie Bases

Liquidtight Connector, 1 Inch, Straight, Zinc Electroplated Steel

Category: Straight Steel Liquidtight Flex Connectors

Q-Rail Grounding Lug with T-Bolt, Aluminum

Category: Solar Grounding Hardware

T-BOLT W/ NUT SS 300 PK [25 BAGS OF 12 IN BOX OF 300]

Category: Solar Mounting Hardware

Auxiliary Contact Block, Front Mounted, 1 Normally Open / Normally Closed, Without Spring Clamp Terminals

Category: Manual Motor Protector Auxiliary Contact Blocks

Liquidtight Connector, 1/2 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Chase Nipple, 3 Inch, Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples