"M16X1,5 KBRM-16 F"

BX or NM-B Staple, 1/4" L x 9/16" W, 3 Conductor 14, 12, & 10 WG or 2 Stacked Oval NM-B 14 & 12 WG, Box of 500

Category: Cable Staples

29 Piece Dottie High Speed Steel Kit, Diameters: 9/32", 17/64", 1/4", 15/64", 7/32", 13/64", 3/16", 11/64", 5/32", 9/64", 3/32", 5/64", 1/16", 13/32", 25/64", 3/8", 23/64", 11/32", 21/64", 5/16", 19/64", 1/2", 31/64", 15/32", 15/32", 29/64", 7/16" & 27/64

Category: Drill / Power / Insert Bit Kits

CHANNEL 1-5/8IN X 13/16 X 10FT 14-GAUGE FULL SLOTTED PG

Category: Steel Strut with Slots

4-11/16" Square Box, Welded, Metallic. Depth: 2-1/8". Side Knockouts: (12) 1/2" & 3/4" TKO (eccentric). Bottom Knockouts: (1) 1/2" & (1) 3/4" & (2) 1/2" & 3/4" TKO (eccentric) . Cubic Inches: 42.0". Includes: Ground Screw.

Category: 4-11/16" Square Metallic Boxes

Step Drill Bit; Vari-bit; Hole Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 In; Shank Size: 3/8 In Diameter; Finish: Steam Oxide Coating; Point Type: Split

Category: Step Bits

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets

Switch Box, 5-Gang, 1-13/16" Deep, WxH: 12-1/4”x4-9/16”, Knockouts - Sides: (10)-1/2", (8)-MKO, Bottom: (6)-1/2", (4)-3/4", Steel

Category: Metallic Gang Boxes

RCH MWTM-16/5-A/U(B100) HEAT SHRINK - 100 FT ROLL

Category: Medium Wall Heat Shrink

4-11/16" Square Cover, 2-Device, Mud Ring, 5/8" Raised, Drawn, Metallic.

Category: 4-11/16" Square Metallic Box Mud Rings

4-11/16" Square Cover, Blank, Mud Ring, No Raise, Drawn, Metallic

Category: 4-11/16" Square Metallic Box Covers

Velocity Lubricant, Size: 5 Gallon, Container: Bucket, Specific Gravity: 0.98, Plastic Safe: Yes, Voc: 1.7 Gpl (as Packaged, Minus Water), Working Temperature: 25 - 140 Deg F, Boiling Point: 212 Deg F (100 Deg C), Percent Volatile By Volume: Less Than 90 Pct, Percent Solid By Weight: Less Than 5 Pct, Ivory Translucent Gel, 6.5 - 8 Ph, Solubility In Water: Moderate, Storage Temperature: 40 - 140 Deg F, Ul Listed, For Wire Pulling

Category: Pulling Lubricant

20 Amp, 125 Volt Receptacle, 20 Amp Feed-Through, Self Testing, SmartLock Pro Slim GFCI, Monochromatic, Back & Side Wired, Wallplate & Self Grounding Clip Included - White

Category: 20 Amp Commercial Grade GFCI Receptacles

Handy Box Cover, Type: Blank, Drawn, Metallic. Width: 2-5/16". Length: 4-3/16".

Category: Metallic Handy Box Covers

6 Hex Sizes: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch, Ratcheting Handle Provides Added Utility And Outstanding Comfort And Control, 3 3/4-Inch (9.5 Cm) Hollow Core Facilitates Work On Threaded Rod, Powerful, Rare-Earth Magnets To Retain Fasteners For One-Handed Driving, Color Coded Hex Sizes For Easy Identification, 5-Inch Sturdy Shaft For Extended Reach And Access, Magnet Size Increases With Each Hex Size To Hold Screws And Nuts, Durable Finish For Corrosion Protection

Category: Multi-Bit Driver

STAINLESS STEEL 5/16 HEX NUT

Category: Stainless Steel Hex Nuts

Panduct® Type F Narrow Slot Wiring Duct, Lead-Free PVC, Light Gray, 2 Inch Wide, 5 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Mini Ratchet And Multi-Bit Driver Set With A Slim Profile Ratchet (Cat. No. 65200) Stubby Handle With 2 Flip Sockets, 7 Screwdriver Bits, Impact Rated Shaft (Cat. No. 32308Hd), Ratchet With A 1/4-Inch And A 5/16-Inch Nut Driver Head And A Ring Magnet And Bit Clip For Fastener And Bit Retention, 5-In-1 Flip Socket Includes 1/4, 5/16, 3/8 And 7/16-Inch Sockets Plus A 1/4-Inch Bit Holding Feature, The 72-Tooth Ratchet Only Needs A 5-Degree Sweep For Tight Areas, Compact Driver Reaches Easily Into Tight Spots, Screwdriver Bit Sizes Include #1, #2, #3 Phillips, 3/16-Inch (5 Mm) And 1/4-Inch (6 Mm) Slotted, #1, #2 Square, Industrial-Strength Bits That Are Conveniently Housed In The Handle

Category: Multi-Bit Driver

Anti-Short Bushing, 5/16 Inch, Trade Size 0, Thermoplastic, For Use With Cable Sizes 14-2, 14-3, 12-2 AWG

Category: Anti-Short Bushings

High Performance Cable Tie for Indoor applications, Green Color Nylon 6.6, Length of 186mm (7.3 Inches) for Bundle Diameter up to 48mm (1.89 Inches), Width of 4.67mm (0.184 Inch), Tensile Strength Rating of 220 Newtons (50 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 85 Degrees Celsius (185 F), UL/EN/CSA62275 Type 2/21S Rated for AH-2 Plenum and as a Flexible Cable and Conduit Support, Military Specified (MIL-SPEC MS3367-1-5), 1000/PK

Category: Non-Releasable Cable Ties

21-in-1 Twist-a-Nut Ratchet Screwdriver, Includes: Slotted (3/16", 1/4", 5/16"), Phillips (#1, #2, #3), Nut Drivers (1/4", 5/8", 7/16"), Square (#1, #2), Star (#15, #20, #25, #30), Hex (3/32", 1/8", 3/16", 3/32"), Wire-Nut® Connector Wrench, Wire Looping H

Category: Ratcheting Multi-Bit Screwdrivers

4-11/16" Square, 5/8" Raised Box Fixture Cover, Mud Ring, Drawn, Metallic. Ears: 2-3/4" Center to Center.

Category: 4-11/16" Square Metallic Box Fixture Covers

5-Piece Hex-Key Set, Includes: 3/16", 7/32", 1/4", 5/16", 3/8"

Category: Hex Key Sets

OZ-Gedney Type ACV 90 DEG Center Stopped 2-Screw Clamp Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 23/64 - 21/32 IN, Malleable Iron, Finish: Zinc Electroplated, 7/16 IN Thread Length, Dimension A: 1-5/16 IN, Dimension B: 13/16 IN, Third Party Certification: UL File Number E-11852 (Armored Cable And Flexible Metal Conduit), Hazardous Location: NEC 501-4(b) Class I Division II, NEC 350-5 (Grounding Means), CSA 9795 And 11584 (Armored cable and Flexible Metal Conduit), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Non-Metallic And Service Entrance Cable

Category: 90 Degree Two Screw Squeeze Flex Connectors

Panduct® Type F Narrow Slot Wiring Duct, Lead-Free PVC, Light Gray, 4 Inch Wide, 5 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct